Alle Preise zzgl. Mehrwertsteuer und Versandkosten und ggf. Nachnahmegebühren, wenn nicht anders beschrieben

 

Xilinx Virtex-7 FPGA VC709 Connectivity Kit

4.920,30 € *

zzgl. MwSt. zzgl. Versandkosten

Bestellung möglich, Lieferzeit auf Anfrage.

  • 24961
  • 0
The Virtex-7 FPGA VC709 Connectivity Kit is a 40Gb/s platform for high-bandwidth and... mehr
Produktinformationen "Xilinx Virtex-7 FPGA VC709 Connectivity Kit"

The Virtex-7 FPGA VC709 Connectivity Kit is a 40Gb/s platform for high-bandwidth and high-performance applications containing all the necessary hardware, tools and IP to power quickly through your evaluation and development of connectivity systems. This includes a 40Gb/s targeted reference design featuring PCI Express Gen 3, a DMA IP core from Northwest Logic, 10GBase-R, AXI, and a Virtual FIFO memory controller interfacing to an external DDR3 memory. To control and monitor this design, the kit includes a connectivity GUI built on Fedora Live OS which includes all the software drivers. Additionally, this kit contains two fiber optic cables and four transceiver modules leveraged by this design.

Es wird gewährleistet, dass Xilinx-Produkte 90 Tage ab Kaufdatum frei von Herstellungsfehlern sind. Es werden keine weiteren ausdrücklichen oder stillschweigenden Garantien erbracht.

Eigenschaften

- 40Gb/s Connectivity platform for high-bandwidth and high-performance applications using Virtex-7 VX690T FPGAs
- Hardware, design tools, IP, and pre-verified reference designs
- Demonstrates an Featuring 10GBase-R interfacing to external DDR3 memory
- Advanced memory interface with 2 4GB DDR3 SODIM Memory up to 933MHz / 1866Mbps
- Enabling serial connectivity with PCIe Gen3x8, 4 SFP+, SMA Pairs, and UART
- Supports embedded processing with MicroBlaze, soft 32bit RISC
- Develop networking applications with 10-100-1000 Mbps Ethernet (RGMII)
- Develop networking and other serial applications with 4 SFP/SFP+ ports
- Expand I/O with the FPGA Mezzanine Card (FMC) interface

Hardware

  • FPGA: Virtex-7 XC7VX690T-2FFG1761C
    - ROHS compliant VC709 kit including the XC7VX690T-2FFG1761C
  • Configuration
    - Onboard JTAG configuration circuitry to enable configuration over USB
    - BPI Parallel NOR Flash: 32MB (256Mb)
  • Memory
    - DDR3 SODIMM (qty 2) - each with 4GB up to 933MHz / 1866Mbps
    - BPI Parallel NOR Flash: 32MB (256Mb)
    - IIC EEPROM: 1KB (8Kb)
  • Communication & Networking
    - 4x SFP/SFP+ cages
    - 10x GTH ports to FMC
    - UART To USB Bridge
    - PCI Express 8-lane edge connector
  • Expansion Connectors
    - FMC-HPC (Partially Populated) connector
    - GTH Transceivers (x10) , 160 single-ended or 80 differential (34 LA & 46 HA) user defined signals
    - VADJ fixed at 1.8 volts
  • Clocking
    - Fixed Oscillator with differential 200MHz output, Used as the “system” clock for the FPGA
    - Fixed Oscillator with differential 233.33MHz output, Used as the "memory" clock
    - User Programmable (IIC) Differential Oscillator (Range: 10MHz - 810 MHz, 156.250 MHz default)
    - Differential SMA clock input
    - Differential SMA GTH reference clock input
    - Jitter attenuated clock, Used to support CPRI/OBSAI applications that perform clock recovery from a user-supplied SFP/SFP+ module
  • Control & I/O
    - User Push Buttons (x5)
    - User DIP Switch (8-position)
    - User LEDs (x8)
  • Power
    - AC Power adapter (12V) or ATX

Lieferumfang

- VC709 evaluation board featuring the Virtex-7 XC7VX690T-2FFG1761C FPGA
- Full seat Vivado Design Suite: Design Edition, Node locked & Device-locked to the Virtex-7 XC7VX690T FPGA, with 1 year of updates and support
- Northwest Logic PCI Express DMA Back-End IP (Evaluation License, 12 hour hardware timeout)
- Control & monitor GUI, Fedora 16 Live OS DVD, required software drivers and source code
- Four 10Gb Ethernet transceiver modules and two fiber optic patch cables
- Getting Started Guide (Web)
- Targeted Reference Design: Featuring PCI Express Gen 3, a DMA IP core from Northwest Logic, 10GBase-R, AXI, and a Virtual FIFO memory controller interfacing to an external DDR3 memory
- Board Design Files (DxDesigner 2005, Allegro 16.3 – 16.5)
- Cables & Power Supply
- 90-day limited warranty

Andere Xilinx Boards sind ebenfalls lieferbar, bitte senden Sie Ihre Anfrage an sales at trenz biz.

Zusätzliche Informationen

Hersteller: Xilinx
Artikelname des Herstellers: Xilinx Virtex-7 FPGA VC709 Connectivity Kit
Artikelnummer des Herstellers: DK-V7-VC709-G
Produktseite des Herstellers
Xilinx Solution Center
Xilinx User Community Foren

Weiterführende Links zu "Xilinx Virtex-7 FPGA VC709 Connectivity Kit"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic