Alle Preise zzgl. Mehrwertsteuer und Versandkosten und ggf. Nachnahmegebühren, wenn nicht anders beschrieben


Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit

Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit
2.708,11 € *

zzgl. MwSt. zzgl. Versandkosten

voraussichtlich lieferbar am 17-May-2017

  • 27704
  • 0
The ZCU102 Evaluation Kit enables designers to jumpstart designs for Automotive, Industrial,... mehr
Produktinformationen "Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit"

The ZCU102 Evaluation Kit enables designers to jumpstart designs for Automotive, Industrial, Video and Communications applications. This kit features a Zynq UltraScale+™ MPSoC device with a quad-core ARM® Cortex-A53, dual-core Cortex-R5 real-time processors, and a Mali-400 MP2 graphics processing unit based on Xilinx's 16nm FinFET+ programmable logic fabric. The ZCU102 supports all major peripherals and interfaces enabling development for a wide range of applications.


  • Optimized for quick application prototyping with Zynq Ultrascale+ MPSoC
  • DDR4 SODIMM – 4GB 64-bit w/ ECC attached to Processor Subsystem (PS)
  • DDR4 Component – 512MB 16-bit attached to Programmable Logic (PL)
  • PCIe Root Port Gen2x4, USB3, Display Port & SATA
  • 4x SFP+ cages for Ethernet
  • 2x FPGA Mezzanine Card (FMC) interfaces for I/O expansion including 16 x 16.3 Gb/s GTH transceivers and 64 user defined differential I/O signals

Andere Xilinx Boards sind ebenfalls lieferbar, bitte senden Sie Ihre Anfrage an sales at trenz biz.


Featured Xilinx Devices

    • Processors: ARM® quad-core Cortex-A53, dual-core Cortex R5, Mali-400 MP2 GPU
    • IO: 406
    • LC: 480K
    • BRAM: 32.1 Mb
  • Onboard JTAG configuration circuitry to enable configuration over USB
  • Dual Quad-SPI flash memory
  • Boot from SD card

    Communication & Networking
  • RGMII communications at 10, 100, or 1000 Mb/s. Serial GMII interface-supports a 1 Gb/s SGMII interface
  • 4x SFP+ cage
  • SMA GTH support (4x SMA Tx/Rx connectors)
  • UART To USB bridge
  • RJ45 Ethernet connector
  • SATA (1 x GTR) (note1)
  • PCIe Gen2x4 Root Port (note1)

    Expansion Connectors
  • 2x FMC-HPC connectors (16 GTH Transceivers, 64 differential user defined signals)
  • 2x PMOD headers
  • IIC

    Control & I/O
  • 6x Directional Push Buttons (5x PL, 1x PS)
  • DIP switches (8x PL)
  • PMBUS & System Controller MSP430 for power, clocks, and I2C bus switching
  • USB2/3 (MIO ULPI and 1 GTR) (note1)

  • PS 4GB DDR4 64-bit SODIMM w/ ECC
  • PL 512MB DDR4 component memory ([256 Mb x 16] devices) at 1200MHz / 2400Mbps DDR
  • Dual 64MB Quad SPI flash
  • SD card slot

  • HDMI video input and output (3 GTH)
  • External Retimer device driving an HDMI output connector
  • 9x GPIO user LEDs (8x PL, 1x PS)
  • VESA DisplayPort 1.2 source-only controller supports up to two lanes of main link data at rates of 1.62 Gb/s, 2.70 Gb/s, or 5.40 Gb/s.

  • Programmable clocks
  • System clocks, user clocks, jitter attenuated clocks
  • 2x SMA MGT input clocks

  • 12V wall adapter or ATX


  • ZCU102 Evaluation board featuring the Zynq UltraScale XCZU9EG-2FFVB1156 FPGA
  • Access to a full seat of Vivado® Design Suite: Design Edition
  • Node-locked and device-locked to the XCZU9EG
  • Design examples and targeted reference designs for easy onboarding
  • Accessories including USB cables, power, etc.

Zusätzliche Informationen

Hersteller: Xilinx
Artikelname des Herstellers: Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit
Artikelnummer des Herstellers: EK-U1-ZCU102-ES2-G
Produktseite des Herstellers
Xilinx Solution Center
Xilinx User Community Foren

Weiterführende Links zu "Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit"