12GSDI FMC Connectivity mezzanine card

€1,777.70 (2,115.46 € gross) *

Prices plus VAT plus shipping costs

Possible to order, delivery time on request.

  • 26686
  • 0
This article is distributed only within Germany! The TB-FMCH-12GSDI FMC has a dedicated... more
Product information "12GSDI FMC Connectivity mezzanine card"

This article is distributed only within Germany!

The TB-FMCH-12GSDI FMC has a dedicated SDI input, a dedicated SDI output, and three SDI channels that are either input or output. Each SDI channel supports a data rate up to 11.88 Gbps. It also has a video sync input for a video sync separator chip. All video signal connections are via 75 ohm HDBNC jacks. A video clock generator can also produce common video timing signals from oscillators or from HVF sync signals from the host FPGA.

The TB-FMCH-12GSDI uses Samtec’s FMC HPC connector for connection with a platform board having High-Pin Count connectors. It is a single width air-cooled FMC that is compatible with the ANSI/VITA 57.1 FPGA Mezzanine Card (FMC) Standard. A second FMC HPC connector allows a second TB-FMCH-12GSDI to be stacked to double the number of SDI inputs and outputs.

Note: Even if your target carrier card supports a single TB-FMCH-12GSDI, there is no guarantee that stacking will be supported (typically due to limited gigabit transceiver connectivity). If stacking is a critical feature for you, please contact your sales representative to confirm operation prior to ordering/stacking.

The TB-FMCH-12GSDI supports SD/HD/3G/6G/12G SDI rates to enable next generation UHDTV 4k/60fps video over a single coaxial cable.

Inrevium products are warranted to be free from manufacturing defects for 30 days from the date of purchase. No other express or implied warranties are provided.


  • 6x 75Ω HD-BNC connectors
    • 1x 12G SDI input, 1x 12G SDI output, 3x 12G In or Out
    • 1x Video Sync input
  • Compatible with FMC Specification (VITA 57.1)
  • Designed for electrical compatibility* with inrevium ACDC, Xilinx KC705, VC707, VC709, KCU105, and ZC706
  • Stackable FMC design supports additional TB-FMCH-12GSDI

* Verify your target mainboard with us prior to ordering

Product Outline

  • 12G-SDI performance, featuring: MACOM chipset (M23145G,M23428G,M23554G)
  • FMC Connectors
    • HPC FMC connector
    • Expansion (stackable) HPC FMC (supports a second card of the same type)
  • IO Connectors
    • HD-BNC type, 75Ω
    • Ch0: Dedicated input and dedicated output
    • Ch1-3: Individually config. as input or output
  • Clocking
    • Video Sync Separator (TI: LMH1981), accepts an external video clock-in, and provides Field Sync, Vsync, and Hsync to the FMC conn
    • Video Clock Generator (TI: LMH1983), accepts Field Sync, Vsync, and Hsync from the FMC connector, and returns 4 synchronized video clocks, and 4 corresponding frame timing signals to the FMC connector
    • Standard video frequency oscillators, 148.5MHz and 148.35165MHz, can be cross-switched to the FMC connector
  • Power Requirements (estimated)
    • Main rails: 12V@0.3A and 3.3V
    • VADJ: 1.5 to 3.3V (onboard level translators)
    • Estimated dissipation: 5W
  • Board Dimension: Single width, air-cooled, HPC FMC with regions 1,2,3
  • Adapter Cables: QTY 5: HD-BNC-to-BNC, 10cm length

Scope of Delivery

  • 1 x TB-FMCH-12GSDI FMC card


  • Design Package (available under license)
    • Schematics, PCB Layout, Artwork, Bill of Materials
  • FPGA Reference Designs
    • Downloadable .bit file examples
    • Licensable source (some blocks netlist encrypted)
    • KC705 and KCU105 target, coming soon


Inrevium requests us to forward customer data on order. With this information, you'll get access to their technical support website.

Related links to "12GSDI FMC Connectivity mezzanine card"
Trenz_Electronic - Documents and Design files for Trenz Electronic Products