All prices are quoted net of the statutory value-added tax and shipping costs & possibly delivery fees, if not otherwise described

 

STEMlab 125-14 Calibrated Diagnostic Kit

STEMlab 125-14 Calibrated Diagnostic Kit
€499.00 *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • 27765
  • 1
STEMLab is available in two versions and both offer the same functions and features with the... more
Product information "STEMlab 125-14 Calibrated Diagnostic Kit"

STEMLab is available in two versions and both offer the same functions and features with the difference in technical specification of high-frequency inputs and outputs, RAM capacity some other differences (find more info in the table below). They are addressed to target different groups and/or needs.

The STEMlab 125-14 Calibrated Diagnostic Kit contains the STEMlab 14 Board. It has 14bit input / output channels for highly accurate measurement results in professional environment.

Calibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02% and 0.003% DC reference voltage standards. Input gains calibration is performed in medium size timebase range. Red Pitaya STEMlab board is a non-shielded device and its inputs/outputs ground is not connected to the earth grounding. To achieve calibration results stated below, Red Pitaya must be grounded and shielded.

INPUTS
LV settings (+/- 1 V range) HV settings (+/- 20 V range)
0.2 %          +/- 0.5 mV 0.4 % +/2mv
OUTPUTS
DC OFFSET DC GAIN
ACCURACY
RIPPLE (@
0.5 V DC)
+/- 4 mv 0.4 % 0.4 mVpp

 

Find more details here: redpitaya.com/boards/stemlab-boards/

Basic
  STEMLAB 125-10
Processor Processor DUAL CORE ARM CORTEX A9 DUAL CORE ARM CORTEX A9
FPGA FPGA Xilinx Zynq 7010 SOC Xilinx Zynq 7010 SOC
RAM 256MB (2Gb)
System memory Micro SD up to 32GB
Console connection USB to serial converter required
Power connector Micro USB
Power consumption 5V, 1,5A max

Package Content

  • STEMlab 125-14 board
  • Accessories (preloaded SD card 4GB C6, interchangeable power supply, 1 m Ethernet cable)
  • 5 different applications (Oscilloscope, Signal Generator, Spectrum Analyser, Bode Analyser, Logic analyzer Pro)
  • 2 x Oscilloscope probes
  • 2 x SMA to BNC adapters
  • Sensor Extension Module
  • 2 x 50 ohm terminations
  • 2 x SMA T adapter
  • Aluminium case for STEMlab board
  • Connectivity (Ethernet, WIFI)
  • Wi-Fi Dongle
  • Marketplace access
  • MATLAB/LABVIEW remote control
  • Possibility to create own app (open source code available)

References

  • Manufacturer's name: Red Pitaya
  • Manufacturer's part name: STEMLab 125-10 Calibrated Diagnostic kit

Resources

Related links to "STEMlab 125-14 Calibrated Diagnostic Kit"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic