Accessory Kit contains Micro USB cable, Ethernet cable, pre-loaded microSD card and 12V power supply.

Clear, sleek covers made out of plexiglass specifically designed to protect the PYNQ-Z1 Board.

The DMM Shield brings the functionality of a digital multimeter to a convenient shield form factor.

This motor fan is perfect for attaching to the Zybo Z7-20.

The Acrylic Case protects the OpenScope MZ from damage.

Provide your two-wheeled application with much needed stability and balance.

The High Speed Logic Probes come in a pack of four twisted cables.

Practical breadboard for the construction of small circuits with self-adhesive back.

This 6" ribbon cable incorporates multiple signal-ground pairs and facilitates error-free connections.

This cable extends reach of the myRIO expansion port (MXP).

Integrates with the Impedance Analyzer tool in WaveForms.

Designed to be used with the Analog Discovery to provide a secure connection with any breadboard.

This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector.

Meant for use with FPGA development boards. The module is designed around the Omnivision OV5640.

The Breadboard Adapter is intended to be used with the Analog Discovery tool to provide a prototyping surface with a secure connection.

The Pmod Shield is an adapter board from the Uno R3 style shield headers present on many Digilent system boards to Pmod.

This assembly features a 2x16 keyed female pin connector for the DIN_USR connector, with 24 DIN signals (various colors) and 8 GND wires (black).

The 2X6 flywire features two VCCIO_USR wires (red), two GND wires (black), and eight signal wires (colored).

The NI myRIO Starter Accessory Kit includes everything you need to get started connecting to and programming the I/O of NI myRIO.

The NI myRIO Embedded Kit contains common sensors, devices, and a display.

High Speed Adapter for Digital Discovery

The Multi-Touch Display Shield is a gorgeous 2.8“ touchscreen display with a powerful on-board microcontroller.

Powerful and compact motor drive/amplifier.

This power supply is suitable for powering our new PYNQ-Z1, Nexys Video, Genesys 2, and Arty boards. Includes US and EU plug adapters.

Small size 4-phase stepper motor, can operate in either unipolar or bipolar mode.

This kit contains all the parts you need to interface with the outside world using your LabVIEW-connected device!

Uses USB power to provide regulated voltage to your breadboard.

Uses USB power to provide regulated voltage to your breadboard.

Uses USB power to provide regulated voltage to your breadboard.

Uses USB power to provide regulated voltage to your breadboard.

With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos.

With the Pmod Adapter for myRIO you can now connect your myRIO to the expansive selection of Pmod peripheral modules offered by Digilent Inc.

With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmod peripheral modules offered by Digilent Inc.

This project box is the perfect size and will fit most Digilent logic boards.

This kit is a handy accompaniment to your 12-pin Pmod.

Rated AC input voltage: 100 ~ 240VAC, 50-60Hz Not recommended for the NetFPGA-SUME - Not for use with Xilinx development boards.

This extender cable is perfect for locating your motor/gearboxes wherever you need.

Free up your Analog Discovery for other projects!

The myDigital accessory board is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics.

The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices.

These LED strips are just about the best way to get tons of colorful LED light with a minimum of wiring and fuss!

With the Shield Adapter for NI myRIO, you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem.

The NXT Sensor Adapter for the NI myRIO is designed to bring the popular Lego Mindstorms NXT sensors to the myRIO ecosystem.

The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors or two servos independently through the MXP connector on your myRIO.

Solid & secure mounting for your printed circuit board (PCB). Works with the chipKIT Uno32, Max32, uC32, & WF32, Arduino™ Uno & Due boards, or any board measuring 2.1" in width.

The Analog Parts Kit contains a large selection of components perfect for creating a wide variety of useful circuits & devices.

This kit is a handy accompaniment to your 6-pin Pmod.

This kit is a handy accompaniment to your 6-pin Pmod.

This kit is a handy accompaniment to your 6-pin Pmod.

Turn any PC into a powerful electrical engineering workstation! The USB-powered Analog Discovery lets you measure, visualize, analyze, record, and control mixed analog and digital signal circuits of all kinds.