GigaBee XC6SLX45-2, 2 x 128 MByte SDRAM, 03IN, no Ethernet

€164.00 (195.16 € gross) *

Prices plus VAT plus shipping costs

Possible to order, delivery time on request.

  • TE0600-03-52I11-M
  • 0
  • Full production
Quantity Unit price
To 9 €164.00 (195.16 € gross) *
From 10 €147.60 (175.64 € gross) *
From 25 €139.40 (165.89 € gross) *
From 50 €131.20 (156.13 € gross) *
From 100 €123.00 (146.37 € gross) *
From 250 €114.80 (136.61 € gross) *
From 500 €106.60 (126.85 € gross) *
From 1000 €98.40 (117.10 € gross) *
Description Downloads Resources
This product is not always in stock, but will be produced on customer order (on demand).... more
Product information "GigaBee XC6SLX45-2, 2 x 128 MByte SDRAM, 03IN, no Ethernet"

This product is not always in stock, but will be produced on customer order (on demand).
Please ask for any minimum quantities.


The predecessor of this article is TE0600-03IN. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0600-03-52I11-M GigaBee XC6SLX is an industrial FPGA micromodule integrating a Xilinx Spartan-6 LX FPGA without Gigabit Ethernet Transceiver, two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Sample Applications

  • Cryptographic hardware module
  • Digital signal processing
  • Embedded educational platform
  • Embedded industrial OEM platform
  • Embedded system design
  • Emulation platforms
  • FPGA graphics
  • Image processing
  • IP (intellectual property) cores
  • Low-power design
  • Parallel processing
  • Rapid prototyping
  • Reconfigurable computing
  • System-on-Chip (SoC) development

Key Features

  • High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
  • FPGA Design Security Solution
  • 2 independent 16-bit-wide 1 Gbit (128 MByte) DDR3 SDRAM
    (optional: 2 independent 4 Gbit (512 MByte) DDR3 SDRAM in 2 banks)
  • 128 Mbit (16 MByte) SPI Flash memory (for configuration and operation)
  • JTAG port (SPI indirect)
  • FPGA configuration through:
    • B2B connector
    • JTAG port
    • SPI Flash memory
  • Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  • Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips
  • High-efficiency DC-DC switching regulators
  • 100 MHz reference clock signal
  • eFUSE bit-stream encryption (LX100 or larger)
  • 1 user LED
  • Evenly-spread supply pins for good signal integrity


  • Xilinx Spartan-6 XC6SLX45-2FGG484I FPGA
  • 128 Mbit (16 MByte) serial Flash memory with dual/quad SPI interface
  • 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
  • 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
  • Up to 52 differential FPGA input/output pins available on B2B strips
  • Up to 109 single-ended (+ 1 dual-purpose) FPGA input/output pins available on B2B strips
  • JTAG and SPI pins available on B2B strips
  • 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2V
  • 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5V
  • 2 x 800 mA DC-DC linear regulator for power rails 2.5V and VCCAUX
  • Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
  • 100 MHz clock signal (system + user)
  • Power supply voltage: 3.3V
  • Dimensions: 50 mm × 40 mm (20 cm²)
  • Stacking hight: 8 mm
  • Maximum height on carrier board surface: 12 mm (standard connectors)
  • Weight: 17.2 ± 0.1 g

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

for Trenz Electronic modules with Spartan-3A, -3E and Spartan-6 LX45/LX75

ISE Design Suite: WebPACK Edition

ISE WebPACK delivers a complete, front-to-back design flow providing instant access to the ISE features and functionality at no cost.

Development Support

There is a base board available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TE0600-03-52I11-M Trenz Electronic GigaBee module with Xilinx Spartan-6 FPGA
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.

Related links to "GigaBee XC6SLX45-2, 2 x 128 MByte SDRAM, 03IN, no Ethernet"
Trenz_Electronic - Documents and Design files for Trenz Electronic Products