GigaBee XC6SLX100-2, 2 x 512 MByte SDRAM, commercial temperature range

€225.00 (267.75 € gross) *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • TE0600-03BM
  • 7
Quantity Unit price
To 9 €225.00 (267.75 € gross) *
From 10 €202.50 (240.98 € gross) *
From 25 €191.25 (227.59 € gross) *
From 50 €180.00 (214.20 € gross) *
From 100 €168.75 (200.81 € gross) *
From 250 €157.50 (187.43 € gross) *
From 500 €146.25 (174.04 € gross) *
From 1000 €135.00 (160.65 € gross) *
Description Downloads Resources
This product is not always in stock, but will be produced on customer order (on demand).... more
Product information "GigaBee XC6SLX100-2, 2 x 512 MByte SDRAM, commercial temperature range"

This product is not always in stock, but will be produced on customer order (on demand).
Please ask for any minimum quantities.

 

This article is the replacement for the TE0600-02BM. All changes are included in the Product Change Notification (PCN).

Trenz Electronic GigaBee XC6SLX series are commercial temperature range FPGA micromodules integrating a Xilinx Spartan-6 LX FPGA, Gigabit ethernet transceiver (physical layer), two independent banks of 16-bit-wide 512 MBytes DDR3 SDRAM, 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Sample Applications

  • Cryptographic hardware module
  • Digital signal processing
  • Embedded educational platform
  • Embedded industrial OEM platform
  • Embedded system design
  • Emulation platforms
  • FPGA graphics
  • Image processing
  • IP (intellectual property) cores
  • Low-power design
  • Parallel processing
  • Rapid prototyping
  • Reconfigurable computing
  • System-on-Chip (SoC) development

Key Features

  • High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
  • FPGA Design Security Solution
  • 10/100/1000 tri-speed GBit Ethernet transceiver (PHY)
  • 2 independent 4 GBit (512 MByte) DDR3 SDRAM in 2 banks
  • 128 MBit (16 MByte) SPI Flash memory (for configuration and operation)
  • JTAG port (SPI indirect)
  • FPGA configuration through:
    - B2B connector
    - TAG port
    - SPI Flash memory
  • Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  • Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips
  • High-efficiency DC-DC switching regulators
  • 125 MHz reference clock signal
  • Single-ended custom oscillator (option)
  • eFUSE bit-stream encryption (LX100 or larger)
  • 1 user LED
  • Evenly-spread supply pins for good signal integrity

Specifications

  • Xilinx Spartan-6 XC6SLX100-2FGG484C FPGA
  • 10/100/1000 GBit Ethernet transceiver (physical layer) Marvell Semiconductor 88E1111
  • 128 MBit (16 MByte) serial Flash memory with dual/quad SPI interface
  • 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
  • 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
  • Up to 52 differential FPGA input/output pins available on B2B strips
  • Up to 109 single-ended (+ 1 dual-purpose) FPGA input/output pins available on B2B strips
  • Ethernet (PHY), JTAG and SPI pins available on B2B strips
  • 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V
  • 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5 V
  • 2 x 800& mA DC-DC linear regulator for power rails 2.5 V and VCCAUX
  • Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
  • 125 MHz clock signal (system + user)
  • Footprint for custom single-ended oscillator (option)
  • Power supply voltage: 3.3 V
  • Dimensions: 50 mm × 40 mm (20 cm²)
  • Stacking hight: 8 mm
  • Maximum height on carrier board surface: 12 mm (standard connectors)
  • Weight: 17.2 ± 0.1 g

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

for Trenz Electronic modules with Spartan-6 LX100/LX150

ISE Design Suite (purchase of a software license is necessary)

ISE design suite supports the Spartan-6, Virtex-6, and CoolRunner devices, as well as their previous generation families. ISE design suite runs on Windows XP/7/Server and Linux operating systems. Additionally, ISE supports Spartan-6 devices on Windows 10.

Download and further information:

https://www.xilinx.com/products/design-tools/ise-design-suite.html

Development Support

There is a base board available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TE0600-03BM Trenz Electronic GigaBee module with Xilinx Spartan-6 FPGA
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "GigaBee XC6SLX100-2, 2 x 512 MByte SDRAM, commercial temperature range"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products