Carrier Board for Trenz Electronic 7 Series

€249.00 *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • TE0701-06
  • 20
Quantity Unit price
To 9 €249.00 *
From 10 €224.10 *
From 25 €219.12 *
From 50 €211.65 *
From 100 €204.18 *
From 250 €199.20 *
From 500 €186.75 *
From 1000 €174.30 *
Description Downloads Resources
The Trenz Electronic TE0701 Carrier Board is a base-board for 4 x 5 SoMs, which exposes the... more
Product information "Carrier Board for Trenz Electronic 7 Series"

The Trenz Electronic TE0701 Carrier Board is a base-board for 4 x 5 SoMs, which exposes the module's B2B-connector-pins to accessible connectors and provides a whole range of on-board components to test and evaluate TE 4 x 5 SoMs.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0701 Carrier Board.

Notice

Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Features

  • Trenz 4 x 5 Module Socket (3 x Samtec connectors)
  • RJ45 GbE Ethernet
  • MicroUSB Connector (Device, Host or OTG Modes)
  • SD Card connector - Zynq SDIO0 Bootable SD port
  • Pmod Connector A, 3.3V
    • 6 Pins can be multiplexed to SD Card pins (MIO1 bank when using TE0720)
    • 2 Pins connected to Carrier Controller CPLD
  • Pmod Connector B, 3.3V
    • mapped to 8 PS MIO0 pins if using TE0720 (same mapping as on zedboard)
    • 6 Pins also connected to Carrier Controller CPLD
  • Single 12V Power supply
  • High Performance Enpirion DCDC converter for local supplies
  • VITA57.1 compliant FMC LPC Connector
    • Digitally programmable FMC VADJ Power Supply
  • Carrier Controller CPLD
    • 1200 Macrocell CPLD with Block RAM, Flash and PLL
    • 8 User LEDs mappable to different functions
    • 2 User Pushbuttons mappable to different functions
    • VID and EN control for FMC VADJ DCDC Regulator
  • USB JTAG Interface
    • mini USB connector
    • Compatible with Xilinx tools: Impact, Chipscope, XMD, Vivado/SDK etc..
    • Compatible with OpenOCD debugger including ZYNQ SRST control
    • Based on FT2232H USB chip
    • Channel A can toggle Module (ZYNQ PS) Reset
    • Channel B can be used as USB UART
      •  Carrier Controller can reroute RXD/TXD signals
    • JTAG Port can be connected to (by the Carrier Controller)
      • 4x5 Module JTAG (FPGA + ARM chained in Zynq)
      • 4x5 Module JTAG and FMC JTAG in chain
      • FMC JTAG alone
      • Zynq ARM PS JTAG port (via EMIO muxing in TE0720)
      • 6 Pin header for off board use
      • Pmod Connector B for off-board use

Package Content

1 x TE0701-06 Carrier Board for Trenz Electronic modules with 4 x 5 cm standard footprint only

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "Carrier Board for Trenz Electronic 7 Series"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products
Online Documentation:
Notes:
-corporate - Certificates, Flyer, Catalog, ...
-obsolete_products
CPCIS_Cards - CompactPCI Serial Standard compatible boards with FPGA/SoC device
Development_Boards - complete Evaluation Platforms with FPGA/SoC device
Digital_IO - Levelconverter, like TE0101, TE0102, ...
FMC_Cards - compatible Adapterboards for FMC Connectors
JTAG_Programmer - for Xilinx, Intel and Lattice FPGA/SoC Devices
Modules_and_Module_Carriers - modules with FPGA/SoC device and corresponding carrier boards
Notes:
2.5x6.15 - form factor, like TEI0001, TEI0003, TEL0001, TEM0001, ...
3.05x6.5 - form factor, like TE0876, ...
3.5x7.3 - form factor, like TE0725, TE0725LP, ...
3x4 - form factor, like TE0714, ...
4x5 - form factor, like TE0820, TE0720, TE0715, TE0841, TE0741, TE0712, TE0711, ...
Notes:
4x5_Carriers - like TE0701, TE0703, TE0705, ...
Notes:
TE0701 - Carrierboard for 4x5 modules
Notes:
PCN - Product change notifications
REV01 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
REV02 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
REV03 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
REV04 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
REV05 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
REV06 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
Notes:
Documents - Technical Reference Manual, Schematics, Assembly Diagrams and ..
Disclaimer:
  • Please read the Legal Notices before downloading Trenz Electronics documents and files.
Section Documents and File:
Files Technical Reference Manual (1 Files) TRM-TE0701-06.PDF
Size 2,98 MB / Modified 13.06.2018 - 15:06:31
Schematics (2 Files) SCH-TE0701-06.PDF
Size 2,94 MB / Modified 14.05.2018 - 08:51:07
SCH-TE0701-06C10.PDF
Size 2,94 MB / Modified 14.05.2018 - 08:51:06
Assembly Diagrams (2 Files) AD-TE0701-06.PDF
Size 5,41 MB / Modified 13.08.2018 - 13:29:01
AD-TE0701-06C10.PDF
Size 5,36 MB / Modified 14.05.2018 - 08:51:06
3D PDF (3 Files) 3DB-TE0701-06.PDF
Size 976,22 KB / Modified 14.05.2018 - 08:51:06
3DT-TE0701-06.PDF
Size 1,28 MB / Modified 14.05.2018 - 08:51:06
PDF3D-TE0701-06.PDF
Size 13,2 MB / Modified 14.05.2018 - 08:51:12
Other Files (0 Files)
Firmware - Initial Configuration for diverse PCB components, like CPLD, PLL and ...
HW_Design - PCB Design relevant files, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
Pictures - PCB pictures
TE0703 - Carrierboard for 4x5 modules
TE0705 - Carrierboard for 4x5 modules
TE0706 - Carrierboard for 4x5 modules
TEBA0841 - Carrierboard for 4x5 modules