TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor

€124.00 (147.56 € gross) *

Prices plus VAT plus shipping costs

Possible to order, delivery time on request.

Quantity Unit price
To 9 €124.00 (147.56 € gross) *
From 10 €111.60 (132.80 € gross) *
From 25 €105.40 (125.43 € gross) *
From 50 €99.20 (118.05 € gross) *
From 100 €93.00 (110.67 € gross) *
From 250 €86.80 (103.29 € gross) *
From 500 €80.60 (95.91 € gross) *
From 1000 €74.40 (88.54 € gross) *
Description Downloads Resources
The predecessor of this article is TE0703-05 . All changes are in the Product Change... more
Product information "TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor"

The predecessor of this article is TE0703-05. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0703 carrier board is a baseboard for 4 x 5 SoMs, which exposes the MIO- and the PS/PL-pins of the SoM to accessible connectors and provides a whole range of on-board-components to test and evaluate Trenz Electronic 4 x 5 SoMs.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0703 carrier board.


Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Key Features

  • Trenz 4 x 5 module socket (3 x Samtec LSHM series connectors)
  • Two VG96 backplane connectors are not soldered to the board, but they are included in the package as separate components.
  • SDIO port expander with voltage-level translation
  • Micro SD card connector - Zynq SDIO0 bootable SD port
  • 4 x User LEDs
    • D1 and D2 are connected to the carrier controller, their function depends on the firmware
    • D3 and D4 are connected to the 4 x 5 module B2B connector pins, and are directly controlled by the module
  • Mini USB connector (USB JTAG and UART interface)
  • 1 x User push button
    • Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC.
  • RJ45 GbE connector
  • USB host connector
  • Barrel jack for 5 V* power supply
  • 4A high efficiency power SoC DC-DC step-down converter with integrated inductor for 3.3 V power supply
  • USB JTAG and UART interface (FTDI FT2232H), compatible with Xilinx tools (also with many other tools)
  • 4 User DIP switches
    • Enable/disable update of the "intelligent Carrier Controller"
    • MIO0 (readable signal by iCC and module)
    • 2 "mode" bits

Scope of Delivery

  • 1 x TE0703-06 carrier board for Trenz Electronic modules with a form factor of 4 x 5 cm
  • 2 x VG96 socket connector vertical (DIN 41612), female, series 0903, manufacturer part no. 09032967824

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor"
Trenz_Electronic - Documents and Design files for Trenz Electronic Products