All prices are quoted net of the statutory value-added tax and shipping costs & possibly delivery fees, if not otherwise described

 

TE0729-02-02IF-S Starter Kit

TE0729-02-02IF-S Starter Kit
€390.00 *

Prices plus VAT plus shipping costs

expected to be available on 27-Sep-2017

  • TE0729-02-02IF-S
  • 0
Quantity Unit price
To 9 €390.00 *
From 10 €351.00 *
From 25 €343.20 *
From 50 €331.50 *
From 100 €319.80 *
From 250 €312.00 *
From 500 €292.50 *
From 1000 €273.00 *
The Trenz Electronic Starter Kit TE0729-02-02IF-S consists of a TE0729 module on a TEB0729... more
Product information "TE0729-02-02IF-S Starter Kit"

The Trenz Electronic Starter Kit TE0729-02-02IF-S consists of a TE0729 module on a TEB0729 carrier board with an XMOD FTDI JTAG adapter including mounted heatspreader. Additionally accessories are a 5 V power suppy, two VG96 connectors (DIN 41612), a 16 GB micro SDcard and an USB cable.

TE0729-02 IF Module

The Trenz Electronic TE0729 is an industrial-grade SoC module integrating a Xilinx Zynq-7020 with a Gigabit Ethernet transceiver, 2 x 100 MBit Ethernet, 512 MByte DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a footprint smaller than a credit card, at the most competitive price.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features TE0729-02 IF

  • Zynq XC7Z020-2CLG484I
  • Rugged for shock and high vibration
  • Equipped with sulfur resistant resistors
  • Evenly-spread supply pins for good signal integrity
  • 3 mm mounting holes for Skyline heat spreader
  • 52 x 76 mm form factor
  • 2 x ARM Cortex-A9
  • 1 x 10/100/1000 Mbps Ethernet transceiver PHY
  • 2 x 10/100 Mbps Ethernet transceiver PHYs
  • 3 x MAC-Address EEPROMs
  • 16-Bit wide 512 MByte DDR3 SDRAM
  • 32 MByte QSPI-Flash-Memory
  • 4 GByte e.MMC Memory
  • USB 2.0 high-speed ULPI transceiver
  • Plug-on module with 2 x 120-pin high-speed hermaphroditic strips
  • 136 FPGA I/O's (58 LVDS pairs possible) and 6 PS MIO's available on board-to-board connectors
  • On-board high-efficiency DC-DC converters
    • 4.0 A x 1.0 V power rail
    • 1.5 A x 1.5 V power rail
    • 1.5 A x 1.8 V power rail
    • 1.5 A x 2.5 V power rail
  • System management
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Temperature compensated RTC (real-time clock)
  • User LED
  • Cooling Solution available

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado HL WebPACK Edition (free version)

The Vivado Design Suite HL WebPACK Edition is the FREE version of the design suite. Vivado HL WebPACK delivers instant access to some basic Vivado features and functionality at no cost.

All Xilinx Vivado Versions

TEB0729-02 carrier board

The Trenz Electronic TEB0729 carrier board was especially designed and developed for the use of Trenz Electronic module TE0729.

Key Features TEB0729-02

  • Trenz TE0729 Module Socket (2x Samtec Connectors, 120 Pins)
  • 5V Board supply via DC-Jack (with Current Limit Switch - MP0510)
  • 3 x RJ45 Ethernet
  • 1 x MicroUSB
  • 1 x SD card connector
  • 1 x 128K I2C CMOS Serial EEPROM (24LC128)
  • 1 x 2K I2C Serial EEPROM with EUI-48 Node Identity (24AA025E48)
  • 1 x User Push Button
  • 1 x Red LED
  • 1 x XMOD (TE0790) Pin Header
  • 1 x User Switch FPGA Boot Mode
  • 2 x Pin Header FPGA Bank Power supply
  • 1 x VBat Pin Header
  • 2 X VG96 Pin Header

TE0790-02 XMOD FTDI JTAG Adapter

Xmod-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration Port A is JTAG and Port B is a serial interface.

FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single Xmod 12 x 8 Module.

Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).

NOTE: This adapter is compatible with Xilinx Tools!

Key Features TE0790-02

  • Xmod form-factor
    - supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
    - size: 20 x 25 mm
    - M3 mounting hole
  • FT2232H
    - Channel B RX/TX LED's (on top, not visible from front)
    - mini-USB connector (more rigid then micro-USB)
    - 93C56 EEPROM
  • Lattice XO2-256 CPLD
    - on board programmable using Lattice tools
    - 8 universal I/O pins
    - VCCIO either 3.3 V or user supplied (1.8 to 3.3V)
    - Red user LED (front visible)
    - 12 MHz clock from on-board Oscillator
  • LDO/DCDC for optional USB power
  • Green Power-on LED (front visible)
  • User button (front accessible)
  • 4 position DIP switch
    - Choose CPLD program mode
    - FTDI EEPROM disable (not implemented in PCB REV 1)
    - Use VIO same as VCC
    - Use VCC from USB

Package Content TE0729-02-02IF-S Starter Kit

  • 1 x TE0729-02-02IF SoC module with Xilinx Zynq-7020 XC7Z020-2CLG484I and sulfur resistant resistors
  • 1 x TEB0729-02 carrier board for TE0729 module from Trenz Electronic
  • 1 x KK0729-02TE mounted heatspreader especially for TE0729
  • 1 x TE07290-02 XMOD FTDI JTAG adapter, Xilinx compatible
  • 2 x VG96 Connectors (DIN 41612)
  • 1 x 5V power supply with 4000 mA
  • 1 x 16 GB class 4 microSDHC card without adapter
  • 1 x USB cable, type A to type B mini, 2 meter length
  • 4 x bolts M3 5mm, mounted
  • 4 x M3 x 12 screws
  • 4 x M3 x 6 screws

Additional Informations

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0729-02-02IF-S Starter Kit"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic