TE0820-05-4DE81MAS Starter Kit

The Trenz Electronic Starter Kit TE0820-05-4DE81MAS includes a TE0820-05-4DE81MA SoC module on a TE0703-07 carrier board with a heatsink. Supplied with a 5V power supply, two VG96 connectors (DIN 41612), a 32 GB microSD card and a USB cable.

The Module: TE0820-05-4DE81MA

The Trenz Electronic TE0820-05-4DE81MA is an industrial-grade MPSoC module integrating a AMD Zynq™ UltraScale+™ ZU4EV, 2 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

Key Features

• FPGA
  • Device: AMD Zynq™ UltraScale+™ XCZU4EV-1SFVC784E
  • Speedgrade: -1
  • Temperature range: Extended
  • Package: SFVC784
  • Graphic Processing Unit (GPU) + Video codec unit (VCU)

• RAM / Storage
  • 2 GByte DDR4 SDRAM
  • 128 MByte QSPI Boot Flash in dual parallel mode
  • 8 GByte e.MMC Memory
  • MAC address serial EEPROM with EUI-48 Node Identity

• On Board
  • Lattice MachXO2 CPLD
  • Programmable quad PLL clock generator PLL for PS GTR clocks
  • Hi-speed USB2 ULPI Transceiver
  • 4 x LEDs

• Interface
  • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • Gigabit Ethernet transceiver PHY
  • Hi-speed USB2 ULPI transceiver with full OTG support
  • Graphic Processor Mali-400 MP2
  • 132 x HP PL I/Os (3 banks)
  • 14 x PS MIOs (6 of the MIOs intended for SD card interface in default configuration)
  • 4 x serial PS GTR transceivers
  • Four high-speed serial I/O (HSSIO) interfaces supporting following protocols:
    • PCI Express interface
    • SATA 3.1 interface
    • DisplayPort interface with video resolution up to 4k x 2k
    • USB 3.0 specification compliant interface implementing a 5 Gbit/s line rate
    • 1 GB/s serial GMII interface

• Power
  • All power supplies on board

• Dimension
  • 4 x 5 cm

The Baseboard: TE0703-07

The Trenz Electronic TE0703 carrier board is a baseboard for 4 x 5 SoMs, which exposes the MIO- and the PS/PL-pins of the SoM to accessible connectors and provides a whole range of on-board-components to test and evaluate Trenz Electronic 4 x 5 SoMs.

Key Features

• On Board
  • USB JTAG and UART interface (FTDI FT2232H), compatible with AMD-tools (also with many other tools)
  • SDIO port expander with voltage-level translation
  • 4 x User LEDs
    • D1 and D2 are connected to the carrier controller, their function depends on the firmware
    • D3 and D4 are connected to the 4 x 5 module B2B connector pins, and are directly controlled by the module
  • 1 x User push button
    • Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC
  • 6 A high efficiency power SoC DC-DC step-down converter with integrated inductor for 3.3 V power supply
  • 4 User DIP switches
    • Enable/disable update of the "intelligent Carrier Controller"
    • MIO0 (readable signal by iCC and module)
    • 2 "mode" bits

• Interface
  • Trenz 4 x 5 module socket (3 x Samtec LSHM series connectors)
  • Micro SD card connector - Zynq SDIO0 bootable SD port
  • 2 x VG96 backplane connectors (mounting holes and solder pads)
  • Mini USB connector (USB JTAG and UART interface)
  • RJ45 GbE connector
  • USB-Host connector

• Power
  • Barrel jack for 5V power supply input
• Size
  • 6.45 x 10 cm

Scope of Delivery TE0820-05-4DE81MAS Starter Kit

• 1 x TE0820-05-4DE81MA MPSoC Module with AMD Zynq™ UltraScale+™ ZU4EV-1E
• 1 x TE0703-07 carrier board for Trenz Electronic modules with 4 x 5 cm form factor
• 1 x Pre-installed heatsink for TE0820, spring-loaded
• 2 x VG96 connectors (DIN 41612)
• 1 x Power supply 5V with 4000 mA current including four adapter (US, UK, EU, AUS)
• 1 x 32 GB Class 4 microSDHC card incl. adapter
• 1 x USB cable, Typ A to Typ B mini, 2 meter length

Additional Information

• Manufacturer's article number: TE0820-05-4DE81MAS
• Trenz Electronic Wiki TE0820 Starter Kit
• Support Forum