FPGA to Mezzanine Card (FMC) basierend auf dem VITA 57.1 FMC HPC Standard

Preview: FMC Card with four SFP+ 10 Gbit ports

€179.00 (213.01 € gross) *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Order number: TEF0008-02
In Stock: 9
Article status: Full production

Quantity	Unit price
To 9	€179.00 (213.01 € gross) *
From 10	€161.10 (191.71 € gross) *
From 25	€152.15 (181.06 € gross) *
From 50	€143.20 (170.41 € gross) *
From 100	€134.25 (159.76 € gross) *
From 250	€125.30 (149.11 € gross) *
From 500	€116.35 (138.46 € gross) *
From 1000	€107.40 (127.81 € gross) *

Important: Information for all serial numbers greater than 844880 . The Trenz Electronic... more

Close menu

Product information "FMC Card with four SFP+ 10 Gbit ports"

Important: Information for all serial numbers greater than 844880.

The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 Gbit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.

The front panel is only offered as an additional accessory.

Mounting holes near the front pannel are not implemented due to physical restrictions caused by the SFP cage. The dimensions exceed in some area the by Vita 57.1 standard defined dimensions. In the middle region of the card the cage is higher than the specified max high for this area. Check carefully if the carrier card uses this space for other components conflicting mechanical. The bottom side is at the high limit.

All parts are at least extended temperature range of 0°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

Four SFP+ 10 Gbit ports
HPC FMC connector
Low jitter programmable clock generator
Intel MAX10 FPGA 10M08SAU169C8G
3.3 V to 1.8 V DC/DC converter
128 Kbit EEPROM
Status LED (green)
Dimension: 69 x 84 mm, SFP+ connector excluded (+ 5.5 mm)
Highest part on PCB top is 9.5 mm (SFP+ cage, excluded front plate), bottom 1.4 mm (MAX10 FPGA)

Other assembly options for cost or performance optimization plus high volume prices available on request.

Scope of Delivery

1 x TEF0008-02 Trenz Electronic FMC card

Additional Information

Manufacturer's article number: TEF0008-02
Trenz Electronic TEF0008 Wiki
Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "FMC Card with four SFP+ 10 Gbit ports"

Downloads

Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products

Online Documentation:

Trenz Electronic Wiki Documentation

Notes:

If you did not find the necessary documents, please send a request mail to Trenz Electronic Support (support[at]trenz-electronic.de).

-corporate - Certificates, Flyer, Catalog, ...
-obsolete_products
Accessories - Connectors, Heatsinks, ...
CPCIS_Cards - CompactPCI Serial Standard compatible boards with FPGA/SoC device
CRUVI
Development_Boards - complete Evaluation Platforms with FPGA/SoC device
Digital_IO - Levelconverter, like TE0101, TE0102, ...
FMC_Cards - compatible Adapterboards for FMC Connectors

Online Documentation:

Trenz Electronic Wiki Documentation » FMC Cards

Notes:

If you did not find the necessary documents, please send a request mail to Trenz Electronic Support (support[at]trenz-electronic.de).

TEF0003 - Xilinx Artix FPGA FMC-modules
TEF0007 - Xilinx Kintex FMC-Module with Displayport Input/Output
TEF0008 - QSFP+ FMC-Module with MAX10

Online Documentation:

Trenz Electronic Wiki Documentation » ... » TEF0008 Resources

Notes:

If you did not find the necessary documents, please send a request mail to Trenz Electronic Support (support[at]trenz-electronic.de).

PCN - Product change notifications
REV02 - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...

Notes:

If you did not find the necessary documents, please send a request mail to Trenz Electronic Support (support[at]trenz-electronic.de).

Documents - Technical Reference Manual, Schematics, Assembly Diagrams and ..
Firmware - Initial Configuration for diverse PCB components, like CPLD, PLL and ...

CPLD Documentation:

Trenz Electronic Wiki Documentation » ... » TEF0008 MAX10 Firmware

Disclaimer:

Please read the Legal Notices before downloading Trenz Electronics documents and files.

Section Documents and File:

If you did not find the necessary documents, please send a request mail to Trenz Electronic Support (support[at]trenz-electronic.de).

Files[-] Close all Programming files of CPLD Firmware (1 Files) SC-PGM-TEF0008-01_SC0008-01_20180607.zip
Size 18,78 KB / Modified 15.08.2018 - 14:39:55
Source Code of CPLD Firmware (0 Files) Other Files (1 Files)

TEF0008 MAX10-v.15-11_09_2021.pdf
Size 142,54 KB / Modified 09.11.2021 - 11:10:13

File	File-Extension	Description
Bit-File	*.bit	FPGA Configuration File
Diverse Reports	--	Report files in different formats

Component	Description
IP-Interfaces	I2C, ASIO (AXI-Stream to IO), SPI-Flash, Uart

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	I2C,SPI-Flash,UART
TE-IP	ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO
TE-IP	Startupe2,LabTools Frequency Counter

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Xilinx-IP	VIO (Virtual Input/Output)
TE-IP	Labtools Frequency Counter, Startupe2 Primitive Wrapper

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
Reference Design	Reference Designs sort by ISE/EDK Version
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Directory	Content
PCN	Product change notifications: Important changes between hardware revisions
REV0x	Documents and source files sorted by PCB revision. Connector Pinout Viewer/XDC-Generator available on TE Master Pinout, as well as a additional informations on All Trenz Electronic SoMs
	Documents	PDF documents, like Technical Reference Manual, Schematics, Assembly Diagrams and...
	Firmware	Initial configuration for diverse PCB components, like CPLD, PLL and ...
	HW Design	Relevant files for PCB-Design, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length, Altium libraries / projects (only for selected carrier boards), and ...
	Pictures	PCB-Pictures

Component	Description
Interface IPs	DDR3, GPIO, Uart0, QSPI and Ethernet

Application	Description
hello_world	Xilinx Hello World Example (.elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	MicroBlaze, MB-Debug, Uartlite, MIG7 for DDR3, QSPI, Timer, Ethernet Lite
TE-IP	ASIO GPIO (AXI-Stream to GPIO)

Application	Description
Hello World	Xilinx Hello world ( generate elf file only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	VIO,ILA
TE-IP	unio_mac

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File

Component	Description
Interface IPs	QSPI, Uart, ASIO (Axi-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	ILA, VIO, CLK-Wizard
TE-IP	F32C, Vector_LED, UART_MON

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

Component	Description
IP-Interfaces	DDR3, QSPI, Uart, I2C, Ethernet, ASIO (AXI-Stream to IO)

Application	Description
hello_world	Xilinx Hello World Example (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
Bit-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Hardware Specification from the vivado project. Used in SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite, VIO
TE-IP	ASIO (AXI-Stream to IO), labtools_fmeter

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
te_spi_bootloader	SPI Bootloader (.elf only)

File	File-Extension	Description
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
BIT-File	*.bit	FPGA Configuration File
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Diverse Reports	--	Report files in different formats

Component	Description
Xilinx-IP	AXI Timer, AXI Interrupt Controller,MIG, AXI QSPI, AXI Uart Lite, AXI I2C, AXI Ethernet Lite

Application	Description
hello_world	Xilinx Hello World Example (.elf only)
memory_tests	Xilinx Memory Example (.elf only)

File	File-Extension	Description
BIT-File	*.bit	FPGA Configuration File
Diverse Reports	---	Report files in different formats
Hardware-Platform-Specification-Files	*.hdf	Exported Vivado Hardware Specification for SDK/HSI
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems

Component	Description
Zynq Processor	activated MIO-Interfaces: DDR3, QSPI, GPIO,2x Uart, QSPI,2x I2C,2x SD,1x Ethernet

Application	Description
zynq_fsbl	Zynq First Stage Bootloader (for hdmi modified and provided as library in /sw_lib/)
hello_world	Xilinx Hello World Example

HW_Design - PCB Design relevant files, like PCB-STEP-Model, Cooler-STEP-Model, Trace-length and ...
Pictures - PCB Revision: Schematics, AD, STEP, HW Design Files and more ...
TEF0010 - Xilinx Artix FPGA FMC-Module with GMSL II Output
JTAG_Programmer - for Xilinx, Intel and Lattice FPGA/SoC Devices
Modules_and_Module_Carriers - modules with FPGA/SoC device and corresponding carrier boards
Motherboards_and_Carriers - standalone carrier boards with FPGA/SoC device
PCIe_Cards - with FPGA/SoC Device on PCIe Card Format
Pinout - Pinout and Trace Length Viewer for Trenz Electronic PCBs
Pmods - compatible adapter for Pmod connectors
Shoparticle - Trenz Electronic Shop Article Selection Guide
Software - drivers, ToolZ, ...
third_party - Third party products containing Trenz PCBs
inrevium
reference

Name	Folder	Description
Source Name	<design_name><folder>	Source Description
PetaLinux Project	<design_name>/os/petalinux	PetaLinux Project with Ethernet,USB,RTC

Key Features

Scope of Delivery

Additional Information

TEC0850 Basic Design

CR00100 Basic Example

CR00100 Basic Example

CR00103 Certus Test

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0802 Basic Linux Example

TE0950 Basic Linux Example

TEI0022 Basic Example

TEI0022 Basic Example

TE0717 Hello World Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0001 Basic Example

TEI0003 LED Sequencer Example

TEI0003 NIOS SDRAM Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0003 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEI0010 Basic Example

TEM0001 Test Board Example

TEI0050 Basic Example

TEI0015 DAQ Capture Demo

TEI0015 Data Capture Demo

TEI0015 Jupyter Demo

TEI0016 DAQ Capture Demo

TEI0016 Data Capture Demo

TEI0016 Jupyter Demo

TEI0023 DAQ Capture Demo

TEI0023 Data Capture Demo

TEI0023 Jupyter Demo

TE0890 Hello World Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

Basic Linux Example

ZynqberryZero Demo VIDEO/AUDIO Design with RPI video camera stream to monitor

TEM0005 Webserver Demo1

MicroBlaze Basic-System

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725 HyperRAM Example

TE0725 Basic Example

TE0725LP Frequency Measurement

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0725LP Basic Example

TE0714 VIO LED Design

TE0714 Basic Barmetal Example

TE0763 Hello World Example

TE0710 MicroBlaze System

TE0710 UNIO MAC

TE0710 Basic Linux Example

TE0710 Basic Linux Example

TE0710 Basic Linux Example

TE0710 Basic Linux Example

TE0711 F32C Demo Design

TE0711 MicroBlaze Design

TE0711 MicroBlaze Design

TE0711 MicroBlaze Design

TE0711 MicroBlaze Design

TE0712 MicroBlaze Basic-System

TE0712 Basic Linux Example

TE0712 Basic Linux Example

TE0712 Basic Linux Example

TE0712 Basic Linux Example