Products from Trenz Electronic GmbH

This module is identical to TE0720-02-1QF except the 2.5 mm Samtec connectors. Xilinx Zynq XA7Z020-1CLG484Q (Automotive), USB 2.0 high speed ULPI transceiver, 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte QSPI Flash-Speicher 4 GByte e.MMC

Xilinx Zynq UltraScale+ XCZU7EV-1FBVB900E; 2 GByte DDR4; 64 MByte QSPI Boot Flash; Dimension: 5,2 x 7,6 cm

FT2232H based JTAG programmer supported by Intel Quartus.

BGA Heat Sink - High Performance, maxiFLOW/maxiGRIP-Low Profile Heat Sink Type: maxiFLOW Heat Sink Attachment: maxiGRIP The heat sink maxiGRIP has been specially modified for the TE0803 module. Features maxiFLOW™ design features a low...

Xilinx Kintex UltraScale KU40 FPGA XCKU040-1SFVA784I 1 GByte 16-Bit width DDR4 (2 x 512 MByte) 64 MByte (512 MBit) SPI Boot Flash Serial transceiver: GTH 8 lanes

Microsemi SmartFusion2 M2S010-VFG400 FPGA; Form factor like RPI2 board; 128 MByte DDR3 SDRAM; Gigabit Ethernet PHY

Xilinx Kintex UltraScale KU35 FPGA XCKU040-1SFVA784C 2 GByte 16-Bit width DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

FT2232H based JTAG programmer supported by Intel Quartus.

Lattice LCMXO2-4000HC-4QN84C FPGA, form factor 2.5 x 6.15 cm, On-Board USB/JTAG, On-Board USB/serial

Narrow SFP to SMA adapter, which has exactly the same width as an SFP slot due to the arrangement of the four SMA connectors.

15A 0-30V BLDC motor driver board, Dimension 40 x 40 mm

Xilinx Zynq 7020 SoC XC7Z020-2CLG484I, USB 2.0 high speed ULPI transceiver, 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte QSPI Flash-Speicher, 4 GByte e.MMC

The Trenz Electronic TE0820-03-04EV-1EA is an industrial-grade MPSoC module integrating a Xilinx Zynq UltraScale+, 1 GByte DDR4 SDRAM with 32-Bit width, 128 MByte Flash memory for configuration and operation, and powerful switch-mode...

Xilinx Zynq SoC XC7Z030-1SBG485I, 10/100/1000 Gigabit Ethernet transceiver (PHY), 1 GByte DDR3, USB 2.0 high-speed ULPI transceiver, 32 MByte SPI Flash memory supporting XiP

Identical to TE0712-02-100-2C except different manufacturer of Flash memor, Xilinx Artix-7 XC7A100T-2FGG484C, 4 MGT's, 32MByte SPI Flash, 1 GByte DDR3

Xilinx Kintex-7 XC7K325T-2FBG676C, One Vita 57.1 FMC HPC Slot, 4 lane PCIe Gen 2, DDR3 SODIMM Socket, 32 MByte SPI Flash

MPSoC with integrated Xilinx Zynq UltraScale+ XCZU6EG-1FFVC900E; 4 GByte DDR4 SDRAM; 128 MByte Flash memory; 52 x 76 mm form factor; 20 x serial transceiver

Xilinx Kintex UltraScale KU35 FPGA XCKU035-1SFVA784C 2 GByte 16-Bit width DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Xilinx Zynq UltraScale+ XCZU2EG-1SFVC784E, 2 GByte DDR4, 128 MByte QSPI Boot Flash, Dimension: 5.2 x 7.6 cm

Xilinx Zynq-7000 Automotive All Programmable SoC XA7Z020-1CLG484Q 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte SPI Flash memory, 4 GByte eMMC, USB 2.0 high speed ULPI transceiver

The TEBA0841 was designed as a low-cost carrier board for Trenz Electronic TE0841 and TE0741 modules.

USB FTDI Interface Board für das icoBoard

Xilinx Spartan-6 LX FPGA XC6SLX45-2FGG484I 2 × 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM 100 MHz clock rate no Ethernet

Xilinx Kintex UltraScale KU40 FPGA XCKU040-1SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Microsemi SmartFusion2 SoC M2S010-VFG400 FPGA; 8 MByte SDRAM; 8 MByte Flash memory

Xilinx Zynq XC7Z020-1CLG400I; 1 GByte DDR3L SDRAM; 32 MByte QSPI Flash memory; 1 x GBit Ethernet PHY

Xilinx Zynq XC7Z010-1CLG400I; 1 GByte DDR3L SDRAM; 32 MByte QSPI Flash memory; 1 x GBit Ethernet PHY

Xilinx Zynq UltraScale+ XCZU15EG-1FFVC900E, 52 x 76 mm form factor, 4 GByte DDR4 SDRAM, 128 MByte SPI Boot Flash, 20 x serial transceiver

Intel Cyclone 10 LP FPGA, SDRAM: 8 MByte, 21 I/O Arduino MKR compatible headers, Sensor: LIS3DH 3-Axis

Xilinx Kintex UltraScale KU035 FPGA XCKU035-2SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Xilinx Kintex UltraScale KU035 FPGA XCKU035-1SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

The Trenz Electronic Starter Kit TE0720-03-1CFA-S consists of a TE0720-03-1CFA module on a TE0703-05 carrier board including heatsink and accessories.

Xilinx Zynq 7020 SoC XC7Z020-1CLG484C; USB 2.0 high speed ULPI transceiver; 32-bit-wide 1 GByte DDR3 SDRAM; 32 MByte QSPI Flash memory 8 GByte e.MMC

High-precision sockets for DIL-IC SMD-plug for DIL with SK5-contacts No. of contacts: 40 Pitch: 2,54 mm Surface: gold-plated (G) Weight: 4 g

The MAX1000 is based on Intel's MAX10 FPGA and is a full production board, developed for evaluation and end products.

Trenz TE0728 module socket, Power supply via DC jack, 2 x RJ45 Ethernet, SD card connector

The Trenz Electronic TEB0729 carrier board was especially designed and developed for the use of Trenz Electronic module TE0729.

The BLWR11 Series Brushless DC Motors come in a compact package with high power density. These motors are cost effective solutions to many velocity control applications. The star wound motor comes in a standard 8-lead configuration. Key...

TE0803 MPSoC module with heatsink on a TEBF0808 carrier board in a Core Mini-ITX Enclosure. Accessories included.

MPSoC module TE0808 ZU9EG with pre-assembled heatsink on a TEBF0808 baseboard in a Core V1 Mini-ITX enclosure plus accesssories.

TE0808 MPSoC module with heatsink on a TEBF0808 carrier board in a Core Mini-ITX Enclosure. Accessories included.