Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
2 From 3
Carrier Board for Trenz Electronic TE0782, TE0783 and TE0784 SoC
Carrier Board for Trenz Electronic TE0782, TE0783 and TE0784 SoC
Carrier Board for TE0782, TE0783 und TE0784 SoC. Most Board to Board IO pins looped back for simple I/O test.
From 145.53 € (168.81 € gross) *
TEBT0782-01
In Stock: 21
HDR-E26LPH - Housing for Connector HDR-E26MSG1+
HDR-E26LPH - Housing for Connector HDR-E26MSG1+
Housing for connector HDR-E26MSG1+
12.00 € (13.92 € gross) *
27020
In Stock: 128
DMC 60: Digital Motor Controller
DMC 60: Digital Motor Controller
Powerful and compact motor drive/amplifier.
39.00 € (45.24 € gross) * €59.31 *
28068
In Stock: 5
STEMlab Logic Analyzer Basic - only for use with STEMlab 125-10 device
STEMlab Logic Analyzer Basic - only for use with STEMlab 125-10 device
Including lifetime license with free updates and Logic Analyzer probes (8ch)
34.00 € (39.44 € gross) *
27767
In Stock: 19
Flat Flexible Cable
Flat Flexible Cable
Accessory for icoBoard, Ribbon Jumper Cable, 51 Position FFC Cable 0.012" (0.30mm) 6.00" (152.40mm)
5.01 € (5.81 € gross) *
28024
In Stock: 4
Flat Flex Connector
Flat Flex Connector
Accessory for icoBoard, 51 Position FPC Connector Contacts, Top and Bottom 0.012" (0.30mm) Surface Mount, Right Angle
1.82 € (2.11 € gross) *
28023
In Stock: 4
12V, 3A Power Supply
12V, 3A Power Supply
This power supply is suitable for powering our new PYNQ-Z1, Nexys Video, Genesys 2, and Arty boards. Includes US and EU plug adapters.
16.94 € (19.65 € gross) *
27999
In Stock: 8
Carrierboard for a TE0745
Carrierboard for a TE0745
The carrier board TEB0745 was especially designed and developed for the use of Trenz Electronic module TE0745.
From 161.40 € (187.22 € gross) *
TEB0745-02
In Stock: 5
TE0705 - Simplified carrier board based upon TE0701
TE0705 - Simplified carrier board based upon TE0701
This carrier board is only for the use of Trenz Electronic modules with a standard footprint of 4 x 5 cm.
From 95.40 € (110.66 € gross) *
TE0705-04
In Stock: 5
Heat Spreader for TE0714-02
Heat Spreader for TE0714-02
Cooling solution especially desgined for Trenz Electronic module TE0714 REV02.
From 23.40 € (27.14 € gross) *
KK0714-02
In Stock: 0
VG96 Connector Vertical, TE Connectivity DIN41612 (male)
VG96 Connector Vertical, TE Connectivity DIN41612 (male)
TE Connectivity DIN 41612 connector
4.91 € (5.70 € gross) *
25190
In Stock: 0
Carrier Board for Trenz Electronic 7 Series
Carrier Board for Trenz Electronic 7 Series
This carrier board is only for the use of Trenz Electronic modules with a standard footprint of 4 x 5 cm.
From 131.40 € (152.42 € gross) *
TE0701-06
In Stock: 0
Heat Spreader for Trenz Electronic TE0729-02 Module
Heat Spreader for Trenz Electronic TE0729-02 Module
Cooling solution especially desgined for Trenz Electronic module TE0729-02.
From 20.40 € (23.66 € gross) *
KK0729-02TE
In Stock: 0
Four Phase Stepper Motor
Four Phase Stepper Motor
Small size 4-phase stepper motor, can operate in either unipolar or bipolar mode.
5.16 € (5.99 € gross) *
27576
In Stock: 0
Simple Base for TE0714
Simple Base for TE0714
The carrier board TEBA0714 was especially designed and developed for the use of Trenz Electronic's TE0714 module.
From 20.40 € (23.66 € gross) *
TEBA0714-01
In Stock: 15
SFP 2 SATA Adapter
SFP 2 SATA Adapter
Host SATA port.
From 54.00 € (62.64 € gross) *
TE0424-01
In Stock: 17
LabVIEW Interaction Parts Kit
LabVIEW Interaction Parts Kit
This kit contains all the parts you need to interface with the outside world using your LabVIEW-connected device!
50.00 € (58.00 € gross) *
27262
In Stock: 3
XMOD JTAG Connector
XMOD JTAG Connector
Accessory for the XMOD JTAG Adapter
From 4.36 € (5.06 € gross) *
TE0791-01
In Stock: 0
Pinheader, straight, single row, 20 pins, 11.3 mm pin length
Pinheader, straight, single row, 20 pins, 11.3 mm pin length
2.54 mm pitch, gold-plated, accessory for TE0722
0.99 € (1.15 € gross) *
24439
In Stock: 0
Precision socket strip, straight, one row, 2.54 mm, 20-pin
Precision socket strip, straight, one row, 2.54 mm, 20-pin
Accessory for TE0722, precision Socket Strip, straight, 2.54 mm pitch, single row, 20 pins
1.20 € (1.39 € gross) *
21288
In Stock: 158
Precision Female Headers, straight, single row, 20 pins
Precision Female Headers, straight, single row, 20 pins
20 pins, 2.54 mm pitch, 7.0 mm profile
1.20 € (1.39 € gross) *
27022
In Stock: 0
Heat Sink for TE0600, spring-loaded embedded
Heat Sink for TE0600, spring-loaded embedded
Please check assembly instructions! Made especially for TE0600 board, provided with a self-adhesive thermal pad, four pressure springs and four screws.
From 11.40 € (13.22 € gross) *
26920
In Stock: 12
Heatsink for TE0720, spring-loaded embedded
Heatsink for TE0720, spring-loaded embedded
Please check assembly instructions! Made especially for TE0720 board, provided with a self-adhesive thermal pad, four pressure springs, two spacers, two washers and four screws.
From 11.40 € (13.22 € gross) *
26922
In Stock: 67
Heat Sink for TE0715, spring-loaded embedded
Heat Sink for TE0715, spring-loaded embedded
Please check assembly instructions! Made especially for TE0715 board, provided with a self-adhesive thermal pad, four pressure springs, two spacers and four screws.
From 11.40 € (13.22 € gross) *
26923
In Stock: 31
Heatsink for TE0710, spring-loaded embedded
Heatsink for TE0710, spring-loaded embedded
Please check assembly instructions! Made especially for TE0710 board, provided with a self-adhesive thermal pad, four pressure springs, three spacers and four screws.
From 11.40 € (13.22 € gross) *
26925
In Stock: 66
Heat Sink for TE0741, spring-loaded embedded
Heat Sink for TE0741, spring-loaded embedded
Please check assembly instructions! Made especially for TE0741 board, provided with a self-adhesive thermal pad, four pressure springs, two spacers and four screws.
From 11.40 € (13.22 € gross) *
26921
In Stock: 0
Heat Sink for TE0712, spring-loaded embedded
Heat Sink for TE0712, spring-loaded embedded
Please check assembly instructions! Made especially for our TE0712 series, provided with a self-adhesive thermal pad, four pressure springs, four spacers, three washer and four screws.
From 11.40 € (13.22 € gross) *
26924
In Stock: 3
Extension Board Z-turn IO Cape
Extension Board Z-turn IO Cape
The Z-turn IO Cape is an IO extension board designed specially for MYIR's Z-turn Board.
31.72 € (36.80 € gross) *
26693
In Stock: 3
Pmod Cable Kit: 12-pin
Pmod Cable Kit: 12-pin
This kit is a handy accompaniment to your 12-pin Pmod.
5.08 € (5.89 € gross) *
26742
In Stock: 40
Power Supply 60W PCIe 12V 5A
Power Supply 60W PCIe 12V 5A
Rated AC input voltage: 100 ~ 240VAC, 50-60Hz, not recommended for the NetFPGA-SUME - not for use with Xilinx development boards.
33.89 € (39.31 € gross) *
26719
In Stock: 7
8 GB Class 4 microSDHC card for TE0703 (w/o adapter)
8 GB Class 4 microSDHC card for TE0703 (w/o adapter)
Writable and erasable removable memory media
7.02 € (8.14 € gross) *
26507
In Stock: 0
8 GB Class 4 microSDHC card for TE0701 (including adapter)
8 GB Class 4 microSDHC card for TE0701 (including adapter)
Writable and erasable removable memory media, 8 GByte, class 4
7.32 € (8.49 € gross) *
26506
In Stock: 0
Analog Discovery Signal Cable Assembly (Flywires)
Analog Discovery Signal Cable Assembly (Flywires)
Free up your Analog Discovery for other projects!
12.70 € (14.73 € gross) *
26485
In Stock: 17
myDigital Protoboard for NI myDAQ & myRIO
myDigital Protoboard for NI myDAQ & myRIO
The myDigital accessory board is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics.
75.42 € (87.49 € gross) *
26488
In Stock: 0
myProto Protoboard for NI myDAQ & myRIO
myProto Protoboard for NI myDAQ & myRIO
The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices.
50.00 € (58.00 € gross) *
26489
In Stock: 4
WS2812 Addressable LED: 1M Waterproof Strip
WS2812 Addressable LED: 1M Waterproof Strip
These LED strips are just about the best way to get tons of colorful LED light with a minimum of wiring and fuss!
16.94 € (19.65 € gross) *
26483
In Stock: 3
Shield Adapter (Uno R3) for NI myRIO
Shield Adapter (Uno R3) for NI myRIO
With the Shield Adapter for NI myRIO, you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem.
21.18 € (24.57 € gross) *
26486
In Stock: 3
NXT Sensor Adapter for NI myRIO
NXT Sensor Adapter for NI myRIO
The NXT Sensor Adapter for the NI myRIO is designed to bring the popular Lego Mindstorms NXT sensors to the myRIO ecosystem.
21.18 € (24.57 € gross) *
26429
In Stock: 0
Prototyping Carrier Board for Micromodule Spartan-3
Prototyping Carrier Board for Micromodule Spartan-3
Provides low-cost connection and extension of the Spartan-3 Micromodule. A low-cost plug & play solution for FPGA prototyping.
From 14.40 € (16.70 € gross) *
TE0143-01
In Stock: 32
chipKIT zUNO Clip: Mechanical Mount for Microcontroller Boards
chipKIT zUNO Clip: Mechanical Mount for Microcontroller Boards
Solid & secure mounting for your printed circuit board (PCB). Works with the chipKIT Uno32, Max32, uC32, & WF32, Arduino™ Uno & Due boards, or any board measuring 2.1" in width.
6.78 € (7.86 € gross) *
26357
In Stock: 0
Solderless Breadboard Kit - Small
Solderless Breadboard Kit - Small
1 x 630 tie point terminal strip, 1 x 100 tie point distribution strip, 4.5 x 11,5 cm (1.75 x 4.5")
6.77 € (7.85 € gross) *
25013
In Stock: 7
ASP-134603-01 female CC-LPC-10
ASP-134603-01 female CC-LPC-10
Samtec FMC-LPC female connector VITA 57 FMC ASP-134603-01.
10.07 € (11.68 € gross) *
24996
In Stock: 0
ASP-134486-01 female, CC-HPC-10
ASP-134486-01 female, CC-HPC-10
The Vita 57 FMC connector is suitable for Baseboards with FMC connector.
17.35 € (20.13 € gross) *
24851
In Stock: 58
Pinheader, straight, double row, 100 pin, 11.3 mm pin length
Pinheader, straight, double row, 100 pin, 11.3 mm pin length
2,54 mm pitch, gold-plated
1.36 € (1.58 € gross) *
21372
In Stock: 49
TE0323-t1.jpg
Carrier board TE0323-00 for 3A DSP Industrial Micromodules
Provides low-cost connection and extension to the Trenz Electronic TE0320 Spartan-3A-DSP industrial micromodule series.
From 14.04 € (16.29 € gross) * €34.00 *
TE0323-00
In Stock: 55
GigaBee XC6SLX carrier board
GigaBee XC6SLX carrier board
B2B pins routed to standard 2.54 mm headers; MicroSD card slot; one 2x6 Digilent Pmod socket;
From 29.40 € (34.10 € gross) *
TE0603-03
In Stock: 90
Carrier Board for Industrial Micromodules TE0300/TE0630
Carrier Board for Industrial Micromodules TE0300/TE0630
Provides low-cost connection and extension to the Trenz Electronic TE0300 and TE0630 industrial micromodules.
From 17.40 € (20.18 € gross) *
TE0303-01
In Stock: 20
Carrier Board with unsoldered headers for TE0300/TE0630
Carrier Board with unsoldered headers for TE0300/TE0630
Provides low-cost connection and extension to the Trenz Electronic TE0300 and TE0630 industrial micromodules.
From 14.40 € (16.70 € gross) *
TE0303-01NC
In Stock: 8
23227_t1.jpg
Wall Power Supply 24 V, 500 mA
In 100...240V AC, Out 24V DC, Max. current 500mA, Cable length about 1,7m, Dimensions 47x65x26mm
12.14 € (14.08 € gross) *
23227
In Stock: 0
Speaker, Mono, with 3.5 mm audio-plug
Speaker, Mono, with 3.5 mm audio-plug
Nominal Impedance 4 Ohms at 1 V (1000 Hz); Frequency Bandwidth 880 Hz to 10 kHz; Max power input 5 W
11.01 € (12.77 € gross) *
24554
In Stock: 0
2 From 3