Sale - Remnants

Xilinx Kintex UltraScale KU40 FPGA XCKU040-1SFVA784I 1 GByte 16-Bit width DDR4 (2 x 512 MByte) 64 MByte (512 MBit) SPI Boot Flash Serial transceiver: GTH 8 lanes

The Digilent Pmod SF2 is a Digilent PmodTM peripheral module that provides 128Mbit (16MByte) of serial PCM memory. The memory on the PmodSF2 is provided by a Micron P5Q PCM integrated circuit.

This module translates the 3.3 V logic levels of a XuLA or XuLA2 board to 5.0 V, 3.3 V, 2.5 V or 1.8 V logic levels.

XILINX Spartan-3E XC3S500E-4VQG100C; 32 Mbit SPI Flash memory; 2 x 50 pin IDC headers; Inputs are 5.5 V tolerant

It can simultaneously sense lateral or rotational motions in sixteen-bit precision and measure the ambient temperature.

XILINX Spartan-3E XC3S250E-4VQG100C; 16 Mbit SPI Flash memory; 2 x 50 pin IDC headers; Inputs are 5.5 V tolerant

The Trenz Electronic TE0323 prototyping carrier board provides low-cost connection and extension to the Trenz Electronic TE0320 Spartan-3A-DSP industrial micromodule series.

The Digilent Vmod Wire Wrap (VmodWW) offers a ready-made solution for prototyping wire wrapped circuits as accessories to Digilent system boards. The VmodWW provides connectors suitable for direct connection with various Digilent system...

The chipKIT Pmod Shield-Uno is an input/output expansion board for use with the chipKIT Uno32. It provides the additional circuitry and connectors to allow Digilent peripheral modules (Pmods) to be used with the Uno32.

The StickIt! Buttons module provides an array of twelve pushbuttons that you can insert into a four-bit or eight-bit PMOD or a Wing socket on your StickIt! board.

The StickIt! LED Digits module provides a row of eight seven-segment LED digits that you can insert into an eight-bit PMOD or Wing socket on your StickIt! board.

This module lets you interface to a VGA monitor. Just connect it to a Pmod or Wing socket on the StickIt! board and your XuLA can display images with up to 16,384 colors.

Pitch: 2.54 mm; Pin lenght: 11.3 mm; 2x 20 pin IC-Header with Ø 0,64 mm; Gold-plated

3.3 V, ret, 9-pin; up to 5 stackable modules on the same connector; brightness controllable (PWM)

The OHO_DY1 module is a small 23 mm x 23 mm (0.9” x 0.9”) 7-segment display unit for displaying 3 digits of hex numbers (12 bits) or arbitrary segment combinations including their respective decimal point.

5.0 V, green, 9-pin; up to 5 stackable modules on the same connector; brightness controllable (PWM)

The Universal Development Board (UDB) is a microcontroller development board intended to use with a wide variety of PIC microcontrollers from Microchip.

chipKIT Pi (Designed for Raspberry Pi) is the latest Arduino compatible chipKIT platform from Microchip and element14.