MCC 172 IEPE Measurement DAQ HAT for Raspberry Pi® incl. 2 coaxial cables
Including two coaxial cables. 6069-471-000The Measurement Computing MCC 172 is a voltage HAT (Hardware Attached on Top) designed for use with Raspberry Pi®. The MCC 172 features two channels for making sound and vibration measurements...
382.91 € (455.66 € gross)
31305
In Stock: 0
MCC 134 Thermocouple Measurement DAQ HAT for Raspberry Pi®
The Measurement Computing MCC 134 is a thermocouple measurement HAT (Hardware Attached on Top) designed for use with Raspberry Pi®. It features 24-bit resolution and provides professional-grade accuracy which is best in class.
127.35 € (151.55 € gross)
31302
In Stock: 0
MCC 172 IEPE Measurement DAQ HAT for Raspberry Pi®
The Measurement Computing MCC 172 is a voltage HAT (Hardware Attached on Top) designed for use with Raspberry Pi®. The MCC 172 features two channels for making sound and vibration measurements from IEPE sensors like accelerometers and...
341.03 € (405.83 € gross)
31304
In Stock: 0
MCC 152 Voltage Output and DIO DAQ HAT for Raspberry Pi®
The Measurement Computing MCC 152 is a voltage output and digital input/output HAT (Hardware Attached on Top) designed for use with Raspberry Pi®. The MCC 152 provides two 12-bit analog outputs with a 0 V to 5 V output range and 5 mA...
127.35 € (151.55 € gross)
31303
In Stock: 0
MCC 128 Voltage Measurement DAQ HAT for Raspberry Pi®
The Measurement Computing MCC 128 is a voltage HAT (Hardware Attached on Top) board designed for use with Raspberry Pi®. It provides eight single-ended (SE) or four differential (DIFF) analog inputs with the following input ranges (+/-10...
170.09 € (202.41 € gross)
31301
In Stock: 0
MCC 118 Voltage Measurement DAQ HAT for Raspberry Pi®
12-bit, high-speed 8-channel voltage measurement DAQ HAT for use with Raspberry Pi®
84.62 € (100.70 € gross)
31300
In Stock: 0
FPGA Module with Intel Cyclone 10 GX 10CX105, 128 MByte DDR3L, 8 x 6 cm
Intel Cyclone 10 GX 10CX105YF780E5G, 128 MByte DDR3L SDRAM, 256 MByte QSPI Boot Flash, 226 I/O's, Gigabit Ethernet, EEPROM, size: 6 x 8 cm
200.33 € (238.39 € gross)
TEI0006-03-ALC13A
In Stock: 0
MPSoC Module with Zynq UltraScale+ ZU19EG-1E, 4 GB DDR4 (PS), 4 GB DDR4 (PL)
Xilinx Zynq UltraScale+ XCZU19EG-1FFVC1760E, 4 GByte DDR4 SDRAM+ECC (PS), 4 GByte DDR4 SDRAM (PL), 256 MByte QSPI Boot Flash, 8 GByte e.MMC, 48 x serielle high-speed transeiver, size: 7,5 x 10 cm
2,317.68 € (2,758.04 € gross)
TE0865-02-FBE23MA
In Stock: 0
MPSoC Module with Zynq UltraScale+ ZU17EG-2E, 4 GB DDR4 (PS), 4 GB DDR4 (PL)
Xilinx Zynq UltraScale+ XCZU17EG-2FFVC1760E, 4 GByte DDR4 SDRAM+ECC (PS), 4 GByte DDR4 SDRAM (PL), 256 MByte QSPI Boot Flash, 8 GByte e.MMC, 48 x serielle high-speed transeiver, size: 7,5 x 10 cm
2,332.08 € (2,775.18 € gross)
TE0865-02-DGE23MA
In Stock: 0
MPSoC Module with Zynq UltraScale+ ZU11EG-1I, 4 GB DDR4 (PS), 4 GB DDR4 (PL)
Xilinx Zynq UltraScale+ XCZU11EG-1FFVC1760I, 4 GByte DDR4 SDRAM+ECC (PS), 4 GByte DDR4 SDRAM (PL), 256 MByte QSPI Boot Flash, 8 GByte e.MMC, 48 x serielle high-speed transeiver, size: 7.5 x 10 cm
2,281.68 € (2,715.20 € gross)
TE0865-02-ABI21MA
In Stock: 0
CRUVI MAX 10 Base Board with Intel MAX 10 FPGA, 8 MByte SDRAM, 44.85 x 57.50 mm
Intel MAX 10 FPGA, 8 MByte SDRAM, JTAG and UART over Micro USB-connector, 3 LEDs, 1 x CRUVI LS, 1 x CRUVI HS, size: 44.85 x 57.50 mm
42.88 € (51.03 € gross)
CR00100-01-DBC82A
In Stock: 0
FMC to CRUVI adapter
FMC to CRUVI Adapter with Intel MAX10 FPGA
65.40 € (77.83 € gross)
CR00101-01
In Stock: 18
Heat Spreader for Trenz Electronic MPSoC Modules TE0803-03 and -04
Cooling solution especially desgined for Trenz Electronic MPSoC module TE0803 (Revision 03 and 04).
23.40 € (27.85 € gross)
KK0803-04
In Stock: 37
Pmod to CRUVI low speed Host Slot
Pmod adapter module that provides a CRUVI low speed base for connecting CRUVI modules.
11.40 € (13.57 € gross)
CR00025-01
In Stock: 0
Bundle: USB104 A7 FPGA Board including Zmod ADC
Discounted bundle (-30%) including a USB104 A7 development board and a Zmod ADC.
442.73 € (526.85 € gross)
30862
In Stock: 0