For use on a FMC HPC carrier and not to be used stand-alone

Xilinx Zynq UltraScale+ XCZU4CG-1SFVC784E, 2 x 128 MByte Flash, 2 GByte DDR4 SDRAM, Size: 5.2 x 7.6 cm

Zynq-7020, 1GB DDR3, 4GB eMMC, 32MB QSPI Flash

766MHz Xilinx XC7Z015 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic, 1GB DDR3 SDRAM, 4GB eMMC, 32MB QSPI Flash, On-board Gigabit Ethernet PHY

Xilinx Zynq UltraScale+ XCZU5EV-1SFVC784E 2 GByte DDR4 128 MByte QSPI Boot Flash Size: 5.2 x 7.6 cm

Zynq-7010, 1GB DDR3, 4GB eMMC, 32MB QSPI Flash, industrial temperature range

Xilinx Zynq SoC XC7Z100, 1 GByte DDR3 (PS), 2 GByte DDR3 (PL), 32 MByte QSPI Flash memory, 4 GByte eMMC, 16 GTX lanes, 1x ETH PHY, 1x USB PHY, 1x SDIO

DK-START-GW1N4 development board adopts GOWIN LittleBeeTM FPGA family products, with features of low-power, instant start-up, high security, low cost, easy extension, which can effectively reduce the learning cost and help users quickly...

The development board uses GW2AR series FPGA GW2AR-18 products, which is the first generation products of Gowin Arora family. GW2AR-18 series FPGA products are one kind of SIP chip.

The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists.

A ready-to-use, low-cost, and easily embeddable development platform designed around the Zynq-7000.

A ready-to-use, low-cost, and easily embeddable development platform designed around the Zynq-7000.

MPSoC with Xilinx Zynq UltraScale+ XCZU9EG-1FFVB1156E, 64bit DDR4 SODIMM, (PS connected), M2 PCIe SSD (1-Lane), eMMC (bootable), Dual QSPI Flash (bootable)

Xilinx Kintex-7 XC7K160T-2FBG676I One Vita 57.1 FMC HPC Slot 4 lane PCIe Gen 2 DDR3 SODIMM Socket 32 MByte SPI Flash

Xilinx Kintex UltraScale XCKU040-1SFVA784I 2 GByte 16-Bit width DDR4 64 MByte (512 MBit) SPI Boot Flash Serial transceiver: GTH 8 lanes

Xilinx Kintex-7 XC7K410T-2FBG676I Ein Vita 57.1 FMC HPC-Steckplatz, 4-Spur PCIe Gen 2, DDR3 SODIMM-Sockel, 32 MByte SPI Flash

Xilinx Zynq UltraScale+ XCZU4EV-1SFVC784E, 2 GByte DDR4, 128 MByte QSPI Boot Flash, Size: 5.2 x 7.6 cm

Xilinx Zynq UltraScale+ XCZU4EV-1SFVC784E, 4 GByte DDR4, 128 MByte QSPI Boot Flash, Size: 5.2 x 7.6 cm

Arty is a ready-to-use development platform designed around the Artix-7 FPGA from Xilinx.

This module is identical to TE0720-02-1QF except the 2.5 mm Samtec connectors. Xilinx Zynq XA7Z020-1CLG484Q (Automotive), USB 2.0 high speed ULPI transceiver, 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte QSPI Flash-Speicher 4 GByte e.MMC

The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework.

Xilinx Zynq UltraScale+ XCZU7EV-1FBVB900E; 2 GByte DDR4; 128 MByte QSPI Boot Flash; Dimension: 5,2 x 7,6 cm

The Digilent ZYBO Z7 is the newest addition to the popular ZYBO line of ARM/FPGA SoC Platform.

Xilinx Kintex UltraScale KU40 FPGA XCKU040-1SFVA784I 1 GByte 16-Bit width DDR4 (2 x 512 MByte) 64 MByte (512 MBit) SPI Boot Flash Serial transceiver: GTH 8 lanes

Microsemi SmartFusion2 M2S010-VFG400 FPGA; Form factor like RPI2 board; 128 MByte DDR3 SDRAM; Gigabit Ethernet PHY

The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework.

Xilinx Kintex UltraScale KU35 FPGA XCKU040-1SFVA784C 2 GByte 16-Bit width DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

The ZCU104 Evaluation Kit enables developers to get started with embedded vision applications such as monitoring, Advanced Driver Assisted Systems (ADAS), Machine Vision, Augmented Reality (AR), drones and medical imaging.

Lattice LCMXO2-4000HC-4QN84C FPGA, form factor 2.5 x 6.15 cm, On-Board USB/JTAG, On-Board USB/serial

The Trenz Electronic TE0820-03-04EV-1EA is an industrial-grade MPSoC module integrating a Xilinx Zynq UltraScale+, 2 GByte DDR4 SDRAM with 32-Bit width, 128 MByte Flash memory for configuration and operation, and powerful switch-mode...

Xilinx Zynq 7020 SoC XC7Z020-2CLG484I, USB 2.0 high speed ULPI transceiver, 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte QSPI Flash-Speicher, 4 GByte e.MMC

Xilinx Zynq SoC XC7Z030-1SBG485I, 10/100/1000 Gigabit Ethernet transceiver (PHY), 1 GByte DDR3, USB 2.0 high-speed ULPI transceiver, 32 MByte SPI Flash memory supporting XiP

Identical to TE0712-02-100-2C except different manufacturer of Flash memor, Xilinx Artix-7 XC7A100T-2FGG484C, 4 MGT's, 32MByte SPI Flash, 1 GByte DDR3

MPSoC with integrated Xilinx Zynq UltraScale+ XCZU6EG-1FFVC900E; 4 GByte DDR4 SDRAM; 128 MByte Flash memory; 52 x 76 mm form factor; 20 x serial transceiver

Xilinx Kintex UltraScale KU35 FPGA XCKU035-1SFVA784C 2 GByte 16-Bit width DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Xilinx Zynq UltraScale+ XCZU2EG-1SFVC784E, 2 GByte DDR4, 128 MByte QSPI Boot Flash, Dimension: 5.2 x 7.6 cm

Xilinx Zynq-7000 Automotive All Programmable SoC XA7Z020-1CLG484Q 32-bit-wide 1 GByte DDR3 SDRAM, 32 MByte SPI Flash memory, 4 GByte eMMC, USB 2.0 high speed ULPI transceiver

Consisting of a Zybo Z7-20 FPGA board (without accessories), a SDSoC voucher and a Pcam 5C fixed focus color camera module.

Xilinx Spartan-6 LX FPGA XC6SLX45-2FGG484I 2 × 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM 100 MHz clock rate no Ethernet

Xilinx Kintex UltraScale KU40 FPGA XCKU040-1SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Microsemi SmartFusion2 SoC M2S010-VFG400 FPGA; 8 MByte SDRAM; 8 MByte Flash memory

Xilinx Zynq XC7Z020-1CLG400I; 1 GByte DDR3L SDRAM; 32 MByte QSPI Flash memory; 1 x GBit Ethernet PHY

Xilinx Zynq UltraScale+ XCZU15EG-1FFVC900E, 52 x 76 mm form factor, 4 GByte DDR4 SDRAM, 128 MByte SPI Boot Flash, 20 x serial transceiver

Intel Cyclone 10 LP FPGA, SDRAM: 8 MByte, 21 I/O Arduino MKR compatible headers, Sensor: LIS3DH 3-Axis

Xilinx Kintex UltraScale KU035 FPGA XCKU035-2SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes

Xilinx Kintex UltraScale KU035 FPGA XCKU035-1SFVA784I 2 GByte DDR4 64 MByte SPI Boot Flash Serial transceiver: GTH 8 lanes