Trenz Electronic Open Hardware

Close filters
 
  •  
  •  
from to
"ArduZynq" Arduino compatible Module with Xilinx Z-7007S Single-Core 512MB DDR3L
"ArduZynq" Arduino compatible Module with Xilinx Z-7007S Single-Core 512MB DDR3L
Arduino Shield compatible module with Xilinx Zynq XC7Z007S-1CLG225C, Single-Core ARM Cortex-A9 MPCore, 512 MByte DDR3L, 16 MByte SPI Flash, USB OTG, on-board USB JTAG and UART.
68.40 € (81.40 € gross)
TE0723-03-11C64-A
In Stock: 0
"ArduZynq" Arduino compatible Xilinx Zynq-7010 SoC-Modul
"ArduZynq" Arduino compatible Xilinx Zynq-7010 SoC-Modul
Arduino Shield compatible module with Xilinx Zynq SoC XC7Z010-1CLG225C, 512 MByte DDR3L, 16 MByte Flash, USB OTG, on-board USB JTAG and UART.
71.40 € (84.97 € gross)
TE0723-03-41C64-A
In Stock: 0
icoUSBaseboard: FTDI Interfacebasis for icoBoard
icoUSBaseboard: FTDI Interfacebasis for icoBoard
USB FTDI Interface Board for icoBoard
29.48 € (35.08 € gross)
TE0889-03
In Stock: 25
S7 Mini - Fully Open-Source Module with Xilinx Spartan-7 7S25, 64 Mbit HyperRAM
S7 Mini - Fully Open-Source Module with Xilinx Spartan-7 7S25, 64 Mbit HyperRAM
Fully Open-Source Spartan-7 Module, 64 Mbit Config PROM for dual-boot and/or SW code storage, 64 Mbit HyperRAM DRAM, 5V supply input
26.13 € (31.09 € gross)
TE0890-01-P1C-5-A
In Stock: 0
IceZero with Lattice ICE40HX, 4 Mbit external SRAM, 5.6 x 3.05 cm
IceZero with Lattice ICE40HX, 4 Mbit external SRAM, 5.6 x 3.05 cm
Low cost general purpose Lattice FPGA platform for the RaspberryPi. It includes 4 Mbit of external SRAM and 4 2x6 Pmod interfaces for 32 3.3V LVCMOS IO's to external expansion devices.
22.78 € (27.11 € gross)
TE0876-02-A
In Stock: 0
XMOD FTDI JTAG Adapter - not compatible with Xilinx Tools
XMOD FTDI JTAG Adapter - not compatible with Xilinx Tools
Universal USB adapter with two channels based on FTDI FT2232H USB2 HS Interface chip and NOT compatible with Xilinx Tools.
19.43 € (23.12 € gross)
TE0790-03L
In Stock: 0
XMOD FTDI JTAG Adapter - Xilinx compatible
XMOD FTDI JTAG Adapter - Xilinx compatible
Universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS interface chip.
26.13 € (31.09 € gross)
TE0790-03
In Stock: 0
DIPFORTy1 "Soft Propeller" with Xilinx Z-7007S Single-core, 16 MByte Flash
DIPFORTy1 "Soft Propeller" with Xilinx Z-7007S Single-core, 16 MByte Flash
Xilinx Zynq-7 XC7Z007S-1CLG225C, DIP40 form factor, 16 MByte SPI Flash, size: 1,8 x 5,1 cm
35.40 € (42.13 € gross)
TE0722-02-07S-1C
In Stock: 0
icoBoard Version 1.1 with 8 Mbit SRAM
icoBoard Version 1.1 with 8 Mbit SRAM
Lattice FPGA with 8k LUT, 100 MHz max. clock, 8 Mbit of SRAM and programmable in Verilog by a complete open source FPGA toolchain
59.63 € (70.96 € gross)
TE0887-03M
In Stock: 29
ArduZynq - Arduino compatible Xilinx Zynq-7010 SoC module
ArduZynq - Arduino compatible Xilinx Zynq-7010 SoC module
Xilinx Zynq SoC XC7Z010-1CLG225C, 512 MByte DDR3L, Arduino Compatible, USB OTG, on-board USB JTAG and UART.
71.40 € (84.97 € gross)
TE0723-03M
In Stock: 3
DIPFORTy1 "Soft Propeller" industrial temperature range
DIPFORTy1 "Soft Propeller" industrial temperature range
Xilinx Zynq-7 XC7Z010-1CLG225I, DIP40 form factor, 16 MByte SPI Flash, size: 1,8 x 5,1 cm, industrial temperature range
41.40 € (49.27 € gross)
TE0722-02I
In Stock: 0
XMOD JTAG Connector
XMOD JTAG Connector
Accessory for the XMOD JTAG Adapter
4.36 € (5.19 € gross)
TE0791-01
In Stock: 51
DIPFORTy1 "Soft Propeller" with Xilinx Zynq-7010 and 16 MByte Flash
DIPFORTy1 "Soft Propeller" with Xilinx Zynq-7010 and 16 MByte Flash
Xilinx Zynq-7 XC7Z010-1CLG225C, DIP40 form factor, 16 MByte SPI Flash, size: 1,8 x 5,1 cm
38.40 € (45.70 € gross)
TE0722-02
In Stock: 12