Motor Control Development Kit with Xilinx Zynq 7020-1C SoC Module
![Motor Control Development Kit with Xilinx Zynq 7020-1C SoC Module]( "Motor Control Development Kit with Xilinx Zynq 7020-1C SoC Module")
Motor Control Development Kit with Xilinx Zynq XC7Z020-1CLG484C, additional connectivity, FTDI miniUSB to JTAG/UART, Gigabit Ethernet, SD card, USB host supports motors with up to 4 phases up to 40V
615.73 € (732.72 € gross)
CR00140-02-K1B
In Stock: 0
Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module
![Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module]( "Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module")
Motor Control Development Kit with Xilinx Zynq UltraScale+ XCZU2CG-1SFVC784E, additional connectivity, FTDI miniUSB to JTAG/UART, Gigabit Ethernet, SD card, USB host supports motors with up to 4 phases up to 40V.
665.98 € (792.52 € gross)
CR00140-02-K0B
In Stock: 0
CRUVI MAX 10 Base Board with Intel MAX 10 FPGA, 8 MByte SDRAM, 44.85 x 57.50 mm
![CRUVI MAX 10 Base Board with Intel MAX 10 FPGA, 8 MByte SDRAM, 44.85 x 57.50 mm]( "CRUVI MAX 10 Base Board with Intel MAX 10 FPGA, 8 MByte SDRAM, 44.85 x 57.50 mm")
Intel MAX 10 FPGA, 8 MByte SDRAM, JTAG and UART over Micro USB-connector, 3 LEDs, 1 x CRUVI LS, 1 x CRUVI HS, size: 44.85 x 57.50 mm
49.58 € (59.00 € gross)
CR00100-01-DBC82A
In Stock: 0
FMC to CRUVI adapter
![FMC to CRUVI adapter]( "FMC to CRUVI adapter")
FMC to CRUVI Adapter with Intel MAX10 FPGA
80.40 € (95.68 € gross)
CR00101-01
In Stock: 17
CRUVI Low Speed to Pmod Adapter
![CRUVI Low Speed to Pmod Adapter]( "CRUVI Low Speed to Pmod Adapter")
Simple passive adapter from CRUVI Low Speed to a Digilent Pmod interface.
5.94 € (7.07 € gross)
CR00005-01-1
In Stock: 0
CRUVI module with CO2 sensor SCD41
![CRUVI module with CO2 sensor SCD41]( "CRUVI module with CO2 sensor SCD41")
The small CRUVI module is designed for qualified CO2 measurements and contains the CO2 sensor SCD41 from Sensirion.
46.23 € (55.01 € gross)
CR00040-01-41
In Stock: 0
CRUVI module without CO2 Sensor
![CRUVI module without CO2 Sensor]( "CRUVI module without CO2 Sensor")
The small CRUVI module is designed for qualified measurements and contains an ambient light and pressure sensor.
16.08 € (19.14 € gross)
CR00040-01-0
In Stock: 0
Pmod to CRUVI low speed Host Slot
![Pmod to CRUVI low speed Host Slot]( "Pmod to CRUVI low speed Host Slot")
Pmod adapter module that provides a CRUVI low speed base for connecting CRUVI modules.
11.40 € (13.57 € gross)
CR00025-01
In Stock: 8
Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module
![Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module]( "Motor Control Development Kit with Xilinx Zynq UltraScale+ ZU2CG-1E MPSoC Module")
Motor Control Development Kit with Xilinx Zynq UltraScale+ XCZU2CG-1SFVC784E, additional connectivity, FTDI miniUSB to JTAG/UART, Gigabit Ethernet, SD card, USB host supports motors with up to 4 phases up to 40V.
665.98 € (792.52 € gross)
CR00140-02-K0A
In Stock: 0
Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards
![Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards]( "Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards")
3 x High Speed and 1 x Low Speed CRUVI B2B connector, Intel MAX 10 FPGA as system controller, Gigabit RJ45 LAN socket, microSD card socket, micro USB2.0 socket
93.13 € (110.82 € gross)
TEB0707-02
In Stock: 0
CRUVI Motor Driver Module
![CRUVI Motor Driver Module]( "CRUVI Motor Driver Module")
Mezzanine card, supports motors with up to 4 phases up to 40V.
160.13 € (190.55 € gross)
CR00140-02
In Stock: 0