TEBA0841 - Simple base for TE0841 and TE0741

€109.00 (129.71 € gross) *

Prices plus VAT plus shipping costs

expected to be available on 22-Apr-2022

  • TEBA0841-02
  • 0
  • Full production
Quantity Unit price
To 9 €109.00 (129.71 € gross) *
From 10 €98.10 (116.74 € gross) *
From 25 €92.65 (110.25 € gross) *
From 50 €87.20 (103.77 € gross) *
From 100 €81.75 (97.28 € gross) *
From 250 €76.30 (90.80 € gross) *
From 500 €70.85 (84.31 € gross) *
From 1000 €65.40 (77.83 € gross) *
Description Downloads Resources
This article is the replacement for the TEBA0841-01 . The Trenz Electronic TEBA0841 is... more
Product information "TEBA0841 - Simple base for TE0841 and TE0741"

This article is the replacement for the TEBA0841-01.

The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and development purposes of TE0841 and TE0741 FPGA modules. Although this base-board is dedicated to the modules TE0841 and TE0741, it is also compatible with other Trenz Electronic 4 x 5 cm SoMs. The carrier board offers one SFP connector, one Micro USB2 B connector, two 2 x 25-pin headers and one XMOD header to get access to the I/O's and interfaces of FPGA modules. To test and evaluate the Multi-Gigabit transceiver units of the FPGA module, 6 MGT lanes on the carrier board are routed in a loop-back circuit on the B2B connectors.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TEBA0841 carrier board.

Key Features

  • 3 x Trenz Electronic 4 x 5 module B2B connectors (Samtec LSHM series)
  • SFP+ connector (enhanced small form-factor pluggable), supports data transmission rates up to 10 Gbit/s
  • Micro USB2 type B connector
  • 4 x 5 SoM programmable by XMOD header
  • Soldering-pads for pin headers for access to SoM's I/O-bank pins, usable as LVDS-pairs
  • Soldering-pads for pin headers for access to further interfaces and I/O's of the SoM
  • 2 x user LEDs routed to I/O-pins of the SoM
  • 4-bit DIP switch for setting module parameters
  • 4 x VCCIO selection jumper to set module's bank voltages

Scope of Delivery

  • 1 x TEBA0841-02 Trenz Electronic carrier board for TE0841, TE0741 and compatible modules
  • 1 x TE0790-03 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
    This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately.
  • 2 x Pin Header, straight, double row, 50 pins
  • 4 x Jumper

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TEBA0841 - Simple base for TE0841 and TE0741"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products