TEBA0841 - Simple base for TE0841 and TE0741

€89.00 (103.24 € gross) *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • TEBA0841-02
  • 12
Quantity Unit price
To 9 €89.00 (103.24 € gross) *
From 10 €80.10 (92.92 € gross) *
From 25 €75.65 (87.75 € gross) *
From 50 €71.20 (82.59 € gross) *
From 100 €66.75 (77.43 € gross) *
From 250 €62.30 (72.27 € gross) *
From 500 €57.85 (67.11 € gross) *
From 1000 €53.40 (61.94 € gross) *
Description Downloads Resources
This article is the replacement for the TEBA0841-01 . The Trenz Electronic TEBA0841 is... more
Product information "TEBA0841 - Simple base for TE0841 and TE0741"

This article is the replacement for the TEBA0841-01.

The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and development purposes of the TE0841 and TE0741 modules. Although this base-board is dedicated to the modules TE0841 and TE0741, it is also compatible with other Trenz Electronic 4 x 5 cm SoMs. The carrier board offers one SFP connector, one Micro USB2 B connector, two 2x25-pin headers and one XMOD header to get access to the I/O's and interfaces of FPGA modules. To test and evaluate the Multi-gigabit transceiver units of the FPGA module, 6 MGT lanes on the carrier board are routed in a loop-back circuit on the B2B connectors.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TEBA0841 carrier board.

Key Features

  • 3 x Trenz Electronic 4 x 5 module B2B connectors (Samtec LSHM series)
  • SFP+ connector (enhanced small form-factor pluggable), supports data transmission rates up to 10 Gbit/s
  • Micro USB2 type B connector
  • 4 x 5 SoM programmable by XMOD header
  • Soldering-pads for pin headers for access to SoM's I/O-bank pins, usable as LVDS-pairs
  • Soldering-pads for pin headers for access to further interfaces and I/O's of the SoM
  • 2 x user LEDs routed to I/O-pins of the SoM
  • 4-bit DIP switch for setting module parameters
  • 4 x VCCIO selection jumper to set module's bank voltages

Scope of Delivery

  • 1 x TEBA0841-02 Trenz Electronic carrier board for TE0841, TE0741 and compatible modules
  • 1 x TE0790-03 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
    This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately.
  • 2 x Pin Header, straight, double row, 50 pins
  • 4 x Jumper

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TEBA0841 - Simple base for TE0841 and TE0741"
Trenz_Electronic - Documents and Design files for Trenz Electronic Products