TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor

€99.00 *

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • TE0703-05
  • 1
Quantity Unit price
To 9 €99.00 *
From 10 €89.10 *
From 25 €87.12 *
From 50 €84.15 *
From 100 €81.18 *
From 250 €79.20 *
From 500 €74.25 *
From 1000 €69.30 *
Description Downloads Resources
The Trenz Electronic TE0703 carrier board provides low-cost connection and extension to all... more
Product information "TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor"

The Trenz Electronic TE0703 carrier board provides low-cost connection and extension to all Trenz Electronic 4 x 5 cm SoC micromodules.

Supported functional range: Wiki Trenz Electronic 4 x 5 cm carrier boards

Notice

Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Features

  • 2 x VG96 Connectors (Mounting Holes and Solder Pads)
  • SDIO Port Expander with Voltage-Level Translation
  • Micro SD Card Connector - Zynq SDIO0 Bootable SD port
  • 4 x User LEDs
    • D1 and D2 are connected to the Carrier Controller, their function depends on the Firmware
    • D3 and D4 are connected to the 4x5 Module B2B Connector pins, and are directly controlled by the module
  • Mini USB Connector (USB JTAG and UART Interface)
  • 1 x User Push Button
    • Connected to "intelligent Carrier Controller (iCC)" and can be used as module reset button. Other usage possible, actual function depend on the code loaded into iCC.
  • RJ45 GbE Connector
  • USB Host Connector
  • Barrel jack for 5V* Power Supply
  • 4A High-Efficiency Power SoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EN6347) for 3.3V Power Supply
  • Trenz 4x5 Module Socket (3x Samtec LSHM Series Connectors)
  • USB JTAG and UART Interface (FTDI FT2232H), compatible with Xilinx Tools (also with many other tools)
  • 4 User DIP Switches
    • Enable/disable update of the "intelligent Carrier Controller"
    • MIO0 (readable signal by iCC and Module)
    • 2 "Mode" bits

Package Content

  • 1 x TE0703-05 carrier board for Trenz Electronic modules with a form factor of 4 x 5 cm
  • 2 x VG96 Socket Connector Vertical (DIN 41612), female, Series 0903, Manufacturer part no. 09032967824

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0703 - Carrier board for Trenz Electronic modules with 4 x 5 cm form factor"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products
Online Documentation:
Notes:
-corporate - Certificates, Flyer, Catalog, ...
-obsolete_products
CPCIS_Cards - CompactPCI Serial Standard compatible boards with FPGA/SoC device
Development_Boards - complete Evaluation Platforms with FPGA/SoC device
Digital_IO - Levelconverter, like TE0101, TE0102, ...
FMC_Cards - compatible Adapterboards for FMC Connectors
JTAG_Programmer - for Xilinx, Intel and Lattice FPGA/SoC Devices
Modules_and_Module_Carriers - modules with FPGA/SoC device and corresponding carrier boards