SoC module with automotive Zynq XA7Z020-1CLG484Q, 1 GByte DDR3, eMMC, 4 x 5 cm

This module is identical to variant TE0720-03-1QF except the manufacturer of the assembled Flash memory is different.

The Trenz Electronic TE0720-03-1QFA is an industrial-grade SoC module integrating a Xilinx Automotive Zynq-7020, a Gigabit Ethernet transceiver, 1 GByte DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

Key Features

• Xilinx Zynq XA7Z020-1CLG484Q (Automotive)
• Rugged for high shock and vibration
• ARM dual-core Cortex-A9 MPCore
• 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY), SGMII accessible on a board-to-board connector
• USB 2.0 high speed ULPI transceiver
• 32-Bit-wide 1 GByte DDR3 SDRAM
• 32 MByte QSPI Flash memory (for configuration and operation)
• 4 GByte e.MMC (up to 32 GByte)
• Plug-on module with 2 × 100-pin and 1 x 60-pin high-speed hermaphroditic strips
• 152 FPGA I/O's (75 LVDS pairs possible) and 14 MIO's available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0 V power rail
  • 1.5 A x 1.5 V power rail
  • 1.5 A x 1.8 V power rail
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Valid MAC Address and 2K serial EEPROM
• SHA-256 authentication chip with unique serial number
• RTC, temperature compensated
• 3 user LEDs
• Evenly-spread supply pins for good signal integrity

Package Content

• 1 x TE0720-03-1QFA Trenz Electronic 4 x 5 cm Micromodule
• 4 x bolts and screws

Additional Information

• Manufacturer's article number: TE0720-03-1QFA
• Trenz Electronic TE0720 Wiki
• Support Forum