TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor

€119.00 (141.61 € gross) *

Prices plus VAT plus shipping costs

expected to be available on 22-Oct-2019

  • TE0706-03
  • 0
Quantity Unit price
To 9 €119.00 (141.61 € gross) *
From 10 €107.10 (127.45 € gross) *
From 25 €101.15 (120.37 € gross) *
From 50 €95.20 (113.29 € gross) *
From 100 €89.25 (106.21 € gross) *
From 250 €83.30 (99.13 € gross) *
From 500 €77.35 (92.05 € gross) *
From 1000 €71.40 (84.97 € gross) *
From 5000 €71.40 (84.97 € gross) *
Description Downloads Resources
This article is the replacement for the TE0706-02 carrier board. All changes caused by the new... more
Product information "TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor"

This article is the replacement for the TE0706-02 carrier board. All changes caused by the new revision are included in the Product Change Notification (PCN).

The TE0706 carrier board provides functionalities for testing, evaluation and development purposes of Trenz Electronic 4 x 5 cm SoMs. It is mainly for the use with TE0720 and TE0715 modules. The carrier board is equipped with various components and connectors for different configuration setups and needs. The interfaces of the SoMs functional units and PL I/O-banks are connected via board-to-board connectors to the carrier board's components and connectors for easy user access.

Supported functional range for all Trenz Electronic 4 x 5 cm carrier boards.

Features

  • 3 x Samtec LSHM series Board to Board connectors
  • VG96 connector (mounting holes and solder pads, J6) and 50-pin IDC male connector socket (J5) for access to PL I/O-bank pins
  • USB2.0 type A connector, or optionally Micro USB 2.0 connector
  • 1 x RJ45 GbE MagJack (J3), connected via MDI to B2B connector JB1
  • 1 x GbE PHY, providing Ethernet interface in conjunction with RJ45 GbE MagJack (J2)
  • 4A High-Efficiency Power SoC DC-DC Step-Down Converter for 3.3V power supply
  • XMOD JTAG-/UART-header JX1
  • 1 x TE0790-02, XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
  • Micro SD card socket
  • SDIO port expander with voltage-level translation and jumper (J13) for selection of SDIO voltage on SoM side
  • DIP-switches S1 to set SoM's control signals
  • 1 x user-push button (S2), by default configured as system reset button
  • 3 x VCCIO selection jumper J10, J11 and J12 to set SoM's PL I/O-bank voltages
  • 5V power supply barrel jack
  • Size: 64.5 x 100 mm

Scope of Delivery

  • 1 x TE0706-03 carrier board for Trenz Electronic modules with a form factor 4 x 5 cm
  • 1 x TE0790-02, XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
  • 1 x VG96 socket connector vertical (DIN 41612), female, series 0903, manufacturer part no. 09032966825

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products