TE0716 - SoM with Xilinx Zynq-7000 SoC XC7Z020, 1 GByte DDR3L, 45 x 65 mm

€239.00 (284.41 € gross) *

Prices plus VAT plus shipping costs

expected to be available on 05-Oct-2021

  • TE0716-01-61C32-A
  • 0
  • Full production
Quantity Unit price
To 9 €239.00 (284.41 € gross) *
From 10 €215.10 (255.97 € gross) *
From 25 €203.15 (241.75 € gross) *
From 50 €191.20 (227.53 € gross) *
From 100 €179.25 (213.31 € gross) *
From 250 €167.30 (199.09 € gross) *
From 500 €155.35 (184.87 € gross) *
From 1000 €143.40 (170.65 € gross) *
Description Downloads Resources
The Trenz Electronic TE0716 is a commercial-grade* SoM (System on Module) based on Xilinx... more
Product information "TE0716 - SoM with Xilinx Zynq-7000 SoC XC7Z020, 1 GByte DDR3L, 45 x 65 mm"

The Trenz Electronic TE0716 is a commercial-grade* SoM (System on Module) based on Xilinx Zynq-7000 SoC XC7Z020*, with 1 GByte of DDR3L-1600 SDRAM*, 32 MByte of SPI Flash memory, 10 x 12-Bit Low Power SAR ADCs, 512 Kb serial EEPROM, Gigabit Ethernet PHY transceiver, an USB PHY transceiver, a single chip USB2.0 to UART/JTAG interface (Xilinx license included), and powerful switching-mode power supplies for all on-board voltages. A large number of configurable I/Os are provided via rugged high-speed board-to-board connectors.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

  • SoC/FPGA
    • Package: CLG484
    • Device: Xilinx Z-7020
    • Speed: -1 *
    • Temperature: C grade *.
  • RAM/Storage
    • Low Power DDR3 SDRAM on PS
      • Data width: 32bit
      • Size: def. 1GB *
      • Speed: 1600 Mbps **
    • QSPI boot Flash
      • Data width: 4bit
      • Size: 32MB *
    • MAC address serial EEPROM with EUI-48™ node identity
    • 512Kb user MAC address serial EEPROM.
  • On Board
    • 10x 12-Bit Low Power SAR ADCs up to 2 MSPS
    • Low Power Oscillators.
    • Gigabit Ethernet PHY transceiver
    • High-Speed USB 2.0 ULPI transceiver with full OTG support
    • Single chip High-Speed USB 2.0 to UART/JTAG Interface (Xilinx License included) (FTDI FT2232H).
    • 2 x User RGB LEDs (Green), LED FPGA "Done" (Green).
    • 2 x Tactile Switches (User), 1 x Tactile Switche (Reset).
  • Interface
    • 120 x HR PL I/Os (3 banks).
    • 2 x PS MIOs (shared with UART TX/RX ZYNQ-FTDI).
    • 1 Gbps RGMII Ethernet interface.
    • High Speed USB 2.0 ULPI with full OTG support.
    • High Speed USB 2.0 to UART/JTAG interface, including microUSB-B connector.
    • microSD
    • JTAG
  • Power
    • On-board high-efficiency DC-DC converters for all voltages used.
  • Dimension
    • 45 x 65 mm
  • Notes
    • * depends on assembly version
    • ** depends on used Zynq and DDR3 combination

Other assembly options for cost or performance optimization plus high volume prices available on request.

Scope of Delivery

  • 1 x TE0716-01-61C32-A SoM with Xilinx Zynq-7000 SoC XC7Z020

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0716 - SoM with Xilinx Zynq-7000 SoC XC7Z020, 1 GByte DDR3L, 45 x 65 mm"
Downloads
Digilent
OHO-Elektronik
SunDance
Trenz_Electronic - Documents and Design files for Trenz Electronic Products