XMOD FTDI JTAG Adapter - AMD/fXilinx compatible

€39.00 (46.41 € gross) *

Prices plus VAT plus shipping costs

Possible to order, delivery time on request.

Quantity Unit price
To 9 €39.00 (46.41 € gross) *
From 10 €35.10 (41.77 € gross) *
From 25 €35.10 (41.77 € gross) *
From 50 €31.20 (37.13 € gross) *
From 100 €29.25 (34.81 € gross) *
From 250 €29.25 (34.81 € gross) *
From 500 €26.13 (31.09 € gross) *
From 1000 €26.13 (31.09 € gross) *
Description Downloads Resources
The predecessor of this article is TE0790-02 . All changes are in the Product Change... more
Product information "XMOD FTDI JTAG Adapter - AMD/fXilinx compatible"

The predecessor of this article is TE0790-02. All changes are in the Product Change Notification (PCN).

XMOD-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration Port A is JTAG and Port B is a serial interface.

FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single XMOD 12 x 8 Module.

Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).

NOTE: This adapter is compatible with AMD Tools!

The adapter not compatible with AMD-Tools can be found here: TE0790-03L


Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Key Features

  • XMOD form-factor
    - Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
    - Size: 20 x 25 mm
    - M3 mounting hole
  • FT2232H
    - Channel B RX/TX LED's (on top, not visible from front)
    - Mini USB connector (more rigid then micro USB)
    - 93C56 EEPROM
  • Lattice XO2-256 CPLD
    - On-board programmable using Lattice tools
    - 8 universal I/O pins
    - VCCIO either 3.3 V or user supplied (1.8V to 3.3V)
    - Red user LED (front visible)
    - 12 MHz clock from on-board Oscillator
  • Step down DC DC Converter for optional power supply via USB-Power
  • Green Power-on LED (front visible)
  • User button (front accessible)
  • 4 position DIP switch
    - Choose CPLD program mode
    - FTDI EEPROM disable (not implemented in PCB REV 1)
    - Use VIO same as VCC
    - Use VCC from USB

Scope of Delivery

  • 1 x TE0790-03 with soldered header (USB cable not included with delivery)

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "XMOD FTDI JTAG Adapter - AMD/fXilinx compatible"
Trenz_Electronic - Documents and Design files for Trenz Electronic Products